It doesn’t matter if it’s for your own safety, for roadworthiness tests or to avoid a fine, ensuring your headlamp bulbs are always functioning is necessary. Indeed, bulbs are wearing parts that will surely burn out in the future and as a consequence need to be swapped out. You’re likely on this site because one of your parking lights is burnt out and you’re struggling with how to change your Jeep Patriot’s license plate bulb, we’ve created this article content to help you do it without any help and not have to go to your motor mechanic. Firstly, we will examine changing the license plate bulb from the outside, secondly, how to change the license plate bulb without outside access, and thirdly, how to change the rear license plate bulb of your Jeep Patriot.
How to replace the license plate bulb on your Jeep Patriot throughout the outside
This technique is the easiest of the two, actually, for this one you will only need to take off the protective covers of the bulbs. Sadly on some years or packages of car these covers do not open from the outside and if this is the case we will dedicate some time on in the second section of this article content to describe the approach.
So let’s start with swapping the number plate bulb by going through the outside of your Jeep Patriot. It doesn’t matter if it’s the front or the back of your car the procedure will be similar.
Here are a few simple actions to follow to perform this maintenance tasks:
- With the engine off, unplug the battery terminals from your car
- Position yourself in front of your license plate and use a flat screwdriver or knife to insert the flat part into the notch supplied for this goal (almost always on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Jeep Patriot
- Use your screwdriver or knife to eject the bulb from its place, in the event that you are scared of destroying anything, you can also do it with your fingers.
- Finally, position the new license plate light bulb
- Last stage, before reassembling, reconnect your battery and test the light to validate the achievement of the process.
.
How to change the number plate bulb on your Jeep Patriot without outside access
Second section of our item, change this license plate bulb on your Jeep Patriot without external access. Most often you will be able to access it, however some series (often at the rear does not allow this access).
How to replace the front license plate bulb on my Jeep Patriot
To replace the one on the front plate, nothing could be less hard, you will have to position yourself under the car (preferably positioned on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, almost always held by two soft plastic tabs by pressing on both at once, then once you have your license plate bulb block in hand, Remove the plastic that operates as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be attentive not to exert too much pressure otherwise you will break the plastic cover), and you will simply have to take off the burnt-out license plate bulb and change it with the new , then verify and reassemble the whole thing.
How to replace the rear license plate bulb on my Jeep Patriot
Finally last option, you must replace the bulb on the backplate of your Jeep Patriot, but you cannot really open the cover from the outside of your car. In this case, here is the approach to execute this operation:
- Disconnect the battery from your Jeep Patriot
- Find the position of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, held by clips, you will have to lever gently on all the frame of the trunk to remove it.
- Once located, before removing the bulb holders, unplug the holders for much easier access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Change the burnt-out license plate bulb on your Jeep Patriot, test it and reassemble it, paying attention to the clips on the trunk liner
.
.
There you have it, you have found out the main methods for swapping license plate bulbs on your car, take notice that on some models the method may be a bit different but you should be able to realize it following the outline of this article. If you can’t do it, don’t hesitate to go to your workshop it would be a shame to break a part of your Jeep Patriot. If you desire to change other bulbs like the position light bulbs on your Jeep Patriot or the low beam bulbs on Jeep Patriot, don’t hesitate to browse our content articles which demonstrate you the process to follow.
To get more tips on the Jeep Patriot, take a look at the Jeep Patriot category.
