It doesn’t matter if it’s for your own personal safety, for roadworthiness testing or to avoid a fine, being certain your headlamp bulbs are all the time working is fundamental. Indeed, bulbs are wearing parts that will surely burn out after a while and as a result need to be swapped out. You’re likely on this website because one of your parking lights is burnt out and you’re worried about how to change your Toyota 4Runner’s license plate bulb, we’ve written and published this document to help you do it without any help and not have to go to your auto technician. Firstly, we will examine changing the license plate bulb from the outside, secondly, how to replace the license plate bulb without outside access, and thirdly, how to replace the rear license plate bulb of your Toyota 4Runner.
How to change the license plate bulb on your Toyota 4Runner through the outside
This solution is the quickest of the two, actually, for this one you will only require to remove the protective covers of the bulbs. Sadly on some years or packages of car these covers do not open from the outside and if this is the case we will take a moment on in the second part of this article to describe the approach.
So let’s begin with replacing the number plate bulb by going through the outside of your Toyota 4Runner. It doesn’t matter if it’s the front or the back of your automobile the technique will be similar.
Here are a few simple actions to follow to carry out this routine service:
- With the engine turned off, disconnect the battery terminals from your car
- Face your license plate and use a flat screwdriver or knife to insert the flat part into the notch supplied for this purpose (generally on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Toyota 4Runner
- Use your screwdriver or knife to eject the bulb from its location, if you are afraid of damaging something, you can also do it with your fingers.
- Finally, put the new license plate light bulb
- Last stage, before reassembling, reconnect your battery and verify the light to confirm the successfulness of the procedure.
.
How to change the number plate bulb on your Toyota 4Runner without outside access
Second part of our content, change this license plate bulb on your Toyota 4Runner without external access. In most cases you will be able to access it, nevertheless some series (often at the rear does not allow this access).
How to change the front license plate bulb on my Toyota 4Runner
To change the one on the front plate, nothing could be simpler, you will have to put yourself under the automobile (ideally placed on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, generally held by two soft plastic tabs by pressing on both simultaneously, then once you have your license plate bulb block in hand, Take out the plastic that works as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be attentive not to apply too much pressure or you will break the plastic cover), and you will simply have to remove the burnt-out license plate bulb and swap it with the new , then test out and reassemble the whole thing.
How to change the rear license plate bulb on my Toyota 4Runner
Finally last option, you must change the bulb on the backplate of your Toyota 4Runner, but you simply cannot open the cover from the outside of your automobile. In this case, here is the tactic to perform this task:
- Unplug the battery from your Toyota 4Runner
- Locate the position of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, held by clips, you will have to lever delicately on all the frame of the trunk to remove it.
- Once located, before removing the bulb holders, disconnect the holders for much easier access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Replace the burnt-out license plate bulb on your Toyota 4Runner, verify it and reassemble it, paying attention to the clips on the trunk liner
.
.
There you have it, you have found out the main approaches for replacing license plate bulbs on your car, remember that on some models the technique may be a bit different but you should be able to accomplish it following the explanation of this content page. If you can’t do it, don’t be reluctant to go to your workshop it would be a shame to break a part of your Toyota 4Runner. If you want to change other bulbs like the position light bulbs on your Toyota 4Runner or the low beam bulbs on Toyota 4Runner, don’t be reluctant to read our articles which explain you the operation to follow.
If perhaps you have any additional questions about the Toyota 4Runner, do not hesitate to consult our Toyota 4Runner category.
