You’re bored with listening to cassettes and only having the ability to enjoy the radio, while your smartphone is loaded with your favourite tracks but you don’t have a 3.5mm or usb port on your car radio, so you can’t appreciate your car travels to the fullest… That’s precisely why we’ve written and published this article content to help you, because right now you’re going to find out how to install a car radio on your Jeep Patriot. To do this, first we will see how to remove the old car radio, then how to install a car radio on Jeep Patriot and at last, how to connect it.
How to install car radio on Jeep Patriot: Removing the old car stereo
Before we get down to the serious business of how to install a car stereo on your Jeep Patriot, there is one necessary step, take off the audio set you currently have on your car. There are two situations, either you have an original headunit, or you have an universal set. Before you start taking out, always don’t forget to remove the negative cable from the battery to prevent any risk of short-circuit or electrocution. Once this is conducted, here are the two solutions dependant upon the stereo that equips your Jeep Patriot:
- Original car radio:
In this instance, you’ll have to be patient, in general, the simple use of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some particular models of specific years, this operation will not be enough to remove the old car radio from your Jeep Patriot. In actual fact, you will need to remove certain auto parts of the centre console to access the car radio itself. To accomplish this, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, don’t forget to disconnect all the connections. - Aftermarket radio :
In this situation the process is much simpler, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is conducted, don’t forget to unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve ended dismantling your old car radio, all you have to do is install the new one!
How to install car radio on your Jeep Patriot: Fitting and connecting the car radio
Let’s go to the essential part for you, how to install a car stereo on your Jeep Patriot. Ahead of time, take the time to verify the suitability of your car and your headunit, and to read the installation instructions, which may give you specific recommendations.
Here are the various guidelines involved in installing an aftermarket car radio. First of all, put in place the metal frame supplied with your new car radio, this frame has the task of holding your car radio in place on your Jeep Patriot, once positioned, don’t forget to press the locking tabs on each side of the frame. Once this step has been accomplished, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Jeep Patriot, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female in order to adapt it to the socket of your new radio. Finally, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame supplied with it on its contour. That’s it, you’ve just discovered how to install a car radio on Jeep Patriot, don’t forget to check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other complications, or want to learn more about your car, don’t be reluctant to visit our page dedicated to it.
If perhaps you have any further questions about the Jeep Patriot, do not hesitate to consult our Jeep Patriot category.
