It doesn’t matter if it’s for your own safety, for roadworthiness tests or to avoid a fine, making sure your headlamp bulbs are all the time effective is extremely important. Indeed, bulbs are wearing parts that will obviously burn out after some time and therefore need to be replaced. You’re probably in this article because one of your parking lights is burnt out and you’re wondering how to change your Lexus IS’s license plate bulb, we’ve created this content to help you do it without any help and not have to go to your technician. Firstly, we will look at changing the license plate bulb from the outside, secondly, how to change the license plate bulb without outside access, and thirdly, how to change the rear license plate bulb of your Lexus IS.
How to replace the license plate bulb on your Lexus IS coming from the outside
This process is the fastest of the two, in truth, for this one you will simply need to take away the protective covers of the bulbs. Unfortunately on some years or packages of car these covers do not open from the outside and if this is the case we will take some time on in the second section of this document to teach you the way.
So let’s begin with replacing the number plate bulb by going through the outside of your Lexus IS. It doesn’t matter if it’s the front or the back of your car the process will be similar.
Here are a few simple guidelines to stick to to perform this maintenance tasks:
- With the engine off, unplug the battery terminals from your car
- Face your license plate and use a flat screwdriver or knife to place the flat part into the notch supplied for this purpose (usually on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Lexus IS
- Use your screwdriver or knife to remove the bulb from its placement, in the event that you are afraid of damaging a thing, you can also do it with your fingers.
- Finally, position the new license plate light bulb
- Last stage, before reassembling, reconnect your battery and verify the light to confirm the successfulness of the task.
.
How to change the number plate bulb on your Lexus IS without outside access
Second section of our item, swap this license plate bulb on your Lexus IS without external access. Most often you will be able to access it, but some series (often at the rear does not allow this access).
How to replace the front license plate bulb on my Lexus IS
To replace the one on the front plate, nothing could be simpler, you will have to position yourself under the car (preferably positioned on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, usually held by two soft plastic tabs by pressing on both at the same time, then right after you have your license plate bulb block in hand, Take away the plastic that works as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be mindful not to put in too much force otherwise you will break the plastic cover), and you will simply have to take away the burnt-out license plate bulb and change it with the new , then test out and reassemble the whole thing.
How to replace the rear license plate bulb on my Lexus IS
Finally last option, you must replace the bulb on the backplate of your Lexus IS, but you cannot really open the cover from the outside of your car. In such a case, here is the process to do this task:
- Unplug the battery from your Lexus IS
- Find the spot of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, held by clips, you will have to lever carefully on all the frame of the trunk to remove it.
- Once located, before removing the bulb holders, unplug the holders for less complicated access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Change the burnt-out license plate bulb on your Lexus IS, verify it and reassemble it, paying attention to the clips on the trunk liner
.
.
There you have it, you have learned the main tactics for replacing license plate bulbs on your car, take notice that on some models the methodology may be a bit different but you should be able to realize it following the explanation of this article. If you can’t do it, don’t be reluctant to go to your garage it would be a shame to break a part of your Lexus IS. If you want to change other bulbs like the position light bulbs on your Lexus IS or the low beam bulbs on Lexus IS, don’t be reluctant to browse our content articles which demonstrate you the process to follow.
Whenever you have any further questions about the Lexus IS, do not hesitate to consult our Lexus IS category.
