Modern cars all come with an impressive number of features, but, due to your budget or the year of your Jeep Patriot, you may not be sufficiently fortunate to have them all. On this page we’re going to help you correct this problem by detailing how to install parking sensor on my Jeep Patriot? In fact, this feature is extremely profitable, especially if you live in the city and have to park your car often in narrow parking spaces. To help you out, we’ll first look at how parking sensors work, then we’ll take a look at how to install a parking reverse sensor on a Jeep Patriot, and finally, how much does a parking sensor cost?

install-parking-sensors-jeep-patriot

How does parking sensors function on an Jeep Patriot?

So we begin with the functioning of a parking sensor. As we revealed to you in the introduction, this particularl interesting feature allows you to know the distance between the back of your Jeep Patriot and an obstacle when you move back. It is therefore mainly honest for people who have to maneuver often, whose field of vision is bad, or whose vehicle size is huge.
Frequently fitted as standard, the reverse sensors of a Jeep Patriot is made up of a kit of sensors (minimum 4) that will be activated with reverse gear and will spot obstacles in the vicinity. The technology utilized is ultrasounds, which will send a signal that will bounce off the obstacle and be sent back to the sensor. A computer will examine the duration of this journey and calculate the distance between the obstacle and the radar. In general you will have a sound indicator in the cabin which will enhance in intensity with the proximity of the obstacle and in some cases a visual sign in complement. The reversing radars of a Jeep Patriot will help you for parking, but as well for security and avoiding pedestrians.

How to install parking sensors on a Jeep Patriot?

We now move on to the section that you are most likely most focused on, installing reverse parking sensors on a Jeep Patriot. This section is for you if you don’t have a standard reserve sensor set up and you still desire to benefit of this technology, or if you have to replace a damaged one. You are lucky, it is possible to buy auto aftermarket parking sensors to install yourself on your Jeep Patriot.

How to replace a faulty backup sensors on a Jeep Patriot

First we’ll see how to replace a faulty parking sensor on an Jeep Patriot. In cases where your Jeep Patriot has suffered a rear shock and one of the sensors of your reversing radar has been damaged, it will have to be replaced to let the system to function effectively. Good thing for you this process is really simple, you can even make it out yourself without any specified mechanical skill:

  • Get a replacement radar of the manufacturer’s brand name.
  • Disconnect the old backup sensor from the back of the bumper.
  • Remove the damaged parking sensor from your Jeep Patriot, this stage is fairly intuitive, it is only clipped on.
  • Remount the new sensor and connect it.
  • All you’ll have to do is test it to make sure it’s functioning effectively.
  • How to install an aftermarket parking sensor kit on an Jeep Patriot

    Now we advance to the section you’re likely most focused on, how to install a reverse sensor set up on a Jeep Patriot that doesn’t have one? As we mentioned earlier, you’re lucky because a good number of OEMs now sell auto aftermarket backup radar models. But, the best performing and least fragile models will be models that fit into your bumper. We will concentrate on these models in this part. It is indispensable to have some notions in electricity, and some notions in do-it-yourself to consider the installation of the kit. You will definitely have to remove the bumper of your Jeep Patriot for the installation, do not be reluctant to consult our article content on this subject matter to learn the process to follow. If you don’t feel like it, you can call a workshop, the operation should take him between 1 and 2 hours, and for you around 3 hours.

    • You will just need to stick to the installation guidelines, but we summarize here the main guidelines.
    • Remove the bumper if you don’t have access to the inside of it.
    • Reflect on the best location of the sensors to avoid blind spots, using the supplied drill bell, drill your bumper.
    • Position your various sensors.
    • Route the cables to the headlamp unit that contains your reverse light.
    • Get the current from the wires to connect your parking sensors to this one.
    • Try it out all out.
    • Install a parking sensor without drilling on a Jeep Patriot

      And finally, we will now present you the installation of a drill-free parking sensors system on a Jeep Patriot. There are two kind, the ultrasounds more vulnerable because subjected to the shocks, and the electromagnetics which stick at the rear of the bumper and which are thus protected, it does not affect your bumper and will thus be easy to take out. This type of radar sticks on the bumper. The installation of these types of sensors will be similar.

      • Stick to the installation owners manual which is accessible with some electrical bases.
      • Identify the best sensor position, either behind the bumper for the electromagnetic reversing sensor(adhesive tape) and or the different spots of the ultrasonic sensors.
      • Glue them together and connect them using the box provided.
      • Give it a try all out.
      • What’s the price of parking sensors for a Jeep Patriot?

        Price of changing a faulty reversing parking sensor for an Jeep Patriot

        The replacement of a damaged reversing radar will rely upon the model, but the price will range between 10 and 30 euros per sensor. It is essential to count approximately one hundred euros for the installation of the kit by a workshop.

        Price of an ultrasonic parking sensors with drilling for Jeep Patriot

        For the models with holes there are many kits and different brands but you will have to count about 50 euros for a reliable system.

        Price of a parking sensors kit without drilling for a Jeep Patriot

        .
        Finally, for the price of a reversing radar without drilling for your Jeep Patriot, what ever version you go for, you will have to spend among 30 and 60 euros.

        Whenever you have any additional questions about the Jeep Patriot, do not hesitate to consult our Jeep Patriot category.