Whether for your personal safety, for roadworthiness testing or to avoid a fine, ensuring your turn signal bulbs are always operational is extremely important. In fact, bulbs are wearing parts that will predictably burn out over the years and consequently need to be swapped out. You’re most likely in this article because one of your front turn signals is burnt out and you’re wondering how to change the bulb of a front turn signal on your Mazda 5, we’ve written this article content to help you do it alone and not have to go to your repair shop. In a first part, we will have a look at the checking a burnt-out front turn signal bulb on your Mazda 5 and in a second part, how to change the front turn signal bulb on your car..
How to find out if the front turn signal bulb on your Mazda 5 is burnt out or needs to be changed?
When you drive your automobile you don’t always have the possibility to examine all the safety components of your Mazda 5. In fact, you are most of the time in a hurry and tend to enter into your automobile, make your journey and put it down instantly without taking the time to do an unexpected check-up. It is therefore relevant to take the time to in some cases examine the condition of your headlights and turn signals. It’s quite possible that you have a front turn signal on your Mazda 5, but that you didn’t notice it. Here are the two simple methods to examine if a front turn signal is burnt out or if you need to swap it fairly quickly:
- When you stop, turn on the ignition on your car, then alternately turn on your left and right front turn signals and get out of the car to examine that they are functional.
- By hearing to the sound of your blinkers. In fact, there is an audible indication on each car that warns you of a front turn indicator bulb burnt out on your Mazda 5, you will perceive that the time between each “click” is much shorter, this means that you will have to replace the front turn signal bulb or before. It’s up to you to examine and verify which one is burnt out by a visual examine as on the first technique shown above.
You may have another bulb to swap, like the one of your low beam or your position lights, don’t be reluctant to consult our content articles to help you to complete this replacing.
Changing the front turn signal bulb on your Mazda 5
Now let’s go to the most essential part of this article content, how to replace the front turn signal bulb of your Mazda 5? Please be aware that this operation is really easy, you will have to access, from the inside of your bonnet, through the wheel arch, or through your bumper to your headlight unit, open it and replace the burnt out front turn signal bulb of your Mazda 5. If it is a bulb on your rear turn signal, see our special article content. However, here are the details of the simple steps to follow to be able to execute this act correctly depending on the technique you wish to adopt.
Change front turn signal bulb on your Mazda 5 through the bonnet:
- Open your bonnet and clear access to your headlight pods.
- Use a torx tip to open the headlight unit on your car
- Unscrew the front turn signal bulb from your car by turning it a quarter turn counterclockwise
- Replace the front flasher bulb of your Mazda 5 by the new one (ensure to examine if it’s an orange or transparent bulb).
- Reassemble and check that the brand-new front turn signal bulb functions.
- Lift your car, and take away the front wheel on the side you want to operate on.
- Take out your wheel arch with a torx bit.
- Go to your headlamp block and swap the front turn signal bulb on your car following the same procedures as on the part previously seen.
- Put your Mazda 5 on a jack or a candle.
- Remove the screws of the motor shoe of your car(plastic part under your motor) and your shock absorber. Be careful with the plastic staples which can be fragile.
- Take away your headlight block and swap the front turn indicator bulb of your Mazda 5 following the steps seen in the parts seen above.
- Put the whole thing back together again.
Change the front turn signal bulb of your Mazda 5 through the wheel arch:
This procedure is extremely practical when you don’t have enough space in the bonnet to access the front turn signal on your car:
Change the front turn signal bulb of your Mazda 5 through the bumper:
On some years or finishes, based on the options the only simple access you will have to swap the front turn signal bulb of your car will be to pass under your front bumper, there are only a few steps that change from the full technique, we will point them right now:
To find more tips on the Mazda 5, take a look at the Mazda 5 category.