Your car’s handbrake is actually a required security feature according to the highway code, in fact , this aims to quit your Mazda 5, even over a slight slope. It must be independent of the main brake controls. It is also possible that after a while the cable system of the hand brake will relax and you will not pass the technical control or you may well feel that it is actually no longer blocking your car. To cope with these complications, we will look at how to adjust the hand brake on your Mazda 5 . To do this, first we will see the adjustment of a manual handbrake on Mazda 5 , after that, in a second step, how to adjust an automatic handbrake, and finally the price of the service performed by a professional.
Adjusting a manual handbrake on Mazda 5?
Thus we commence our document with the hand brake adjustment of a Mazda 5 in its manual version. This kind of version performs in a simple way using a system of cable and screws that allow you to control the tension of the device and therefore to modify the stroke of the lever of your handbrake. To act on it you will need to act on these screws to be able to expand the handbrake cable of your Mazda 5 . In any case, before adjusting the hand brake, you must be sure your rear wheels are not blocked through the adjustment. Please find below the detailed technique to carry out this kind of intervention:
- With the level of the handbrake, remove the plastic console that protects it using the torx screws and clips.
- Once performed, you should find out a trapdoor on your handbrake, open it to see the screw and cable system.
- You will have to locate the locknuts and loosen them with a wrench to allow you to change the cable tension.
- Now screw on the lock nuts on both sides, make certain to make the comparable changes on both sides to keep a balanced brake, and be sure the hand brake lever of your Mazda 5 has a stroke of about three notches.
- Tighten the locknuts and test out the fastening of the rims of your car, if it’s good you can reassemble the set, otherwise tighten up again the tightening screws until you get a great optimal setting
.
If you don’t have access to the handbrake flap of your Mazda 5, the adjustment will probably be precisely the same nonetheless it will be done by passing directly below your car with the level of the handbrake lever. Remember to set your car on the stand before any action.
How do I adjust the automatic handbrake of my personal Mazda 5?
Second system of handbrake adjustment on Mazda 5 , this is an automatic handbrake, not like the manual one, this is done directly on the brake drums or calipers, and is also supposed to change automatically to the wear of your brake shoes or brake pads. It may be that if you before long have to get brake pads, the handbrake will lose power, here are the steps to consider to examine if the tension of your handbrake is the appropriate one:
- Realize that an automatic handbrake can’t be adjusted straight because it is meant to adapt on its own to the have on of the brake pads or shoes of your Mazda 5.
- You can even now examine that the system is operating correctly by putting the car on the stand and checking by driving under the vehicle that the pads are still in good performing order.
- For drum brakes it will be required to take apart the tires to examine your the shoes, we all recommend you to have it done by a professional.
- Remember to change your brake pads if you need to.
What is the cost of adjusting the handbrake of Mazda 5 by a professional?
Finally, if you do not feel comfortable with this procedure, especially since it questions a security component of your car, namely the adjustment of the handbrake of your Mazda 5 , we advise you to go to a repair shop who are able to adjust the handbrake for a about fifty local currency . When you have problems with vibrations when braking on Mazda 5, do not hesitate to refer to our document which relates to this issue.
If you wish more tutorials on the Mazda 5, go to our Mazda 5 category.
