Vehicle mirrors are one of the most essential security features that you have to always ensure that are operating properly, because it is your safety, the safety of other road users and your budget because you can be fined if you have a faulty side mirror. This is the circumstance we will focus on in this article, you have suffered a collision, one of your mirrors is ruined and you are now wanting to know how to change a side mirror on your hyundai i10? You are at the right spot, we will highlight all the guidelines to help you change it in the correct way. First, we’ll take a look at what attracts you in this article, how to change a complete side mirror on your hyundai i10, and then how to change only the mirror glass.
How to change a complete side mirror on my hyundai i10?
Let’s go, we commence this guidebook with the part that almost certainly interests you the most, how to change a side mirror on my hyundai i10? This operation is quite easy and you should be competent to do it on your own with a minimum of tooling. You will just need to remove the plastic cover inside your car’s interior, it is in most cases clipped on the door. For power mirrors, be sure to unplug the power connector that you will see at the rear of the cover. At last, you will have to unscrew the screws that hold the mirror, in general there are three, a simple screwdriver should do just fine to allow you to pass this step of changing the side mirror of your hyundai i10. Remember to keep the mirror on the outside of your vehicle when unscrewing the last screw, so that it does not drop out. Finally to install your new side mirror, you will simply have to fit the new one in the 3 screw axes, screw it back in, reconnect the electricity if it is electric and to finish put back the plastic cover. That’s it, you’ve just discovered how to change the side mirror of your hyundai i10, you know now that it wasn’t that hard to do.
How do you just change the window of the side mirror of my hyundai i10?
In the event that you only wish to change the window of the side mirror of your hyundai i10, you will first need to identify the kind of locking of your mirror. To achieve this, the simplest approach is to examine the fixing system on the replacement glass.
Side mirror glass replacing: tongue-locking glass
- If you wish to change the side mirror glass of your hyundai i10 and it uses a tongue and groove system, you are lucky, it is the least complicated unit to remove. All you have to do is to use a plastic object to remove the window “by force”.
- To reposition it, do the same thing and push it back right into place with force. To verify that it is well situated, move it around.
Side mirror glass replacing: metal spring locking glass
-
- With this locking system, to change the side mirror glass of your hyundai i10 you will have to locate the locking spring, turn the glass in the opposite direction to give you access to it, disassemble it.
- Remember to keep the spring because it is possible that you have not one included it with your new window, change it on your new window, dismantle the old one paying attention to the electric cables in the case of defrosting system
.
- Follow the positioning guide (notch) and gently push it into its housing so as not to break it. Check that it is well situated by moving it around.
Side mirror glass replacing: swivel tray locking glass
-
- You can locate the location of the swivel plate of the window to be changed on the side mirror of your hyundai i10, most of the time it is at the bottom behind the window
.
- Turn the glass in the opposite direction to give you less difficult access to the device and using a screwdriver, rotate the system.
- If your mirror is built with a defrosting system, do the reverse procedure to reattach it and check that it is well placed.
Whenever you have any additional questions about the hyundai i10, do not hesitate to consult our hyundai i10 category.
