If you’re a bit of a do-it-yourselfer, you’re likely keen to take care of most of the work to be carried out on your Fiat Punto, but some are more complicated than others and necessitate the removal of body parts or parts to access the component you want to focus on. We would really like to help you in this operation. That’s why on this web page we are going to view how to remove the bumper from a Fiat Punto. This operation is not very complicated and you should have the ability to do it with few equipment. To do so , first we will see how to remove the front bumper of your Fiat Punto, then how to remove the rear bumper of this one.
How to remove the front bumper from a Fiat Punto
So let’s start our content with the front bumper of your Fiat Punto. To take it off, you will just need a set of ratchet wrenches, some screwdrivers and torx bits. Here are the steps you will have to stick to in order to disassemble the bumper of your Fiat Punto in good conditions:
- If you want to be more relaxed, we encourage you to lift your Fiat Punto and to remove the front wheels to have a perfect access to the whole front bumper.
- Open the bonnet of your automobile: Would seem obvious, but you will need to have access to the bumper attachment in your engine compartment.
- Take off the wheel arches: They’re also known as fenders, but they’ll get in the way and prevent you from accessing all the screws on the front bumper of your Fiat Punto. Dependant on your car features and the year of your model, you will also have the ability to find staples, to do this, you will just have to use a staple extractor or to do it carefully with a big flat screwdriver, and use a lever to open the staple.
- Then you will have to unscrew the screws that is in back of your mudguard and that locks the front bumper of your Fiat Punto on the sides.
- Unscrew the screws or remove the clips on the upper part of the bumper in the engine bay.
- Now it’s time to go beneath your Fiat Punto to unscrew the bolts that are on the chassis of the car, you will find some in the middle of the bumper and on the sides.
- Remember to disconnect the connection of the plate lighting and the distance control sensor if you have it.
- Carefully remove the front bumper by first unclipping the sides. If it doesn’t come off, you most likely forgot a screw or a clip. Think of using a carpet or other to prevent that it gets scratched by touching the ground.
That’s it, you’ve seen all the steps of how to remove the front bumper from your Fiat Punto, to reassemble it stick to the steps in the opposite direction.
How to remove the rear bumper from a Fiat Punto
And to conclude, whether or not the procedure is quite similar, we will check out the case of removing the rear bumper from your Fiat Punto. For each stage to avoid repeating ourselves we will simply give you the broad outlines, refer to part 1 if you have any doubts or questions for more info.
- Start by executing the same first stage, that is, lift your Fiat Punto and take off your rear wheels in order to have an ideal working space to remove the bumper of your Fiat Punto without trouble
- Remove the rear wheel arches of your Fiat Punto to access the side bumper side brackets
- Open your trunk
- Take off the side brackets in your wheel arches to make it more convenient to remove the bumper from your Fiat Punto.
- Remove the lower bindings below your Fiat Punto.
- Simultaneously, be sure you un plug the rear license plate light and the reverse radar sensors if you are equipped with them.
- Unscrew the top brackets from the top of the trunk.
- Now all you have to do is remove the rear bumper from your Fiat Punto, stick to the same procedure as for the front bumper
Here, you have discoverd through these two parts, how to remove the bumper from a Fiat Punto whether it is the front one or the rear one the ways are practically the same and it is enough to be meticulous to make everything go well.
To find more tips on the Fiat Punto, take a look at the Fiat Punto category.
