Regardless for your personal safety, for roadworthiness testing or to avoid a fine, being certain your turn signal bulbs are always operational is necessary. In reality, bulbs are wearing parts that will definitely burn out with time and therefore need to be swapped out. You’re almost certainly on this site because one of your front turn signals is burnt out and you’re wondering how to change the bulb of a front turn signal on your Fiat Punto, we’ve written this content to help you do it alone and independently and not have to go to your technician. In a first part, we will take a look at controling a burnt-out front turn signal bulb on your Fiat Punto and in a second part, how to change the front turn signal bulb on your car..

change-front-turn-bulb-fiat-punto

How to discover if the front turn signal bulb on your Fiat Punto is burnt out or needs to be replaced?

When you drive your motor vehicle you don’t constantly have the possibility to verify all the safety components of your Fiat Punto. In reality, you are in general in a hurry and tend to get into your motor vehicle, make your journey and put it down right away without taking the time to do an regular check-up. It is consequently relevant to take the time to in some cases verify the state of your headlights and turn signals. It’s quite possible that you have a front turn signal on your Fiat Punto, but that you didn’t become aware of it. Here are the two simple techniques to examine if a front turn signal is burnt out or if you need to replace it fairly quickly:

  • When you stop, turn on the ignition on your car, then alternately turn on your left and right front turn signals and get out of the car to examine that they are functioning.
  • By listening to the sound of your blinkers. In reality, there is an audible signal on each car that warns you of a front turn indicator bulb burnt out on your Fiat Punto, you will perceive that the time between each “click” is much closer, this denotes that you will have to change the front turn signal bulb or before. It’s up to you to verify and check which one is burnt out by a visual examine as on the first methodology shown earlier mentioned.

You may have an additional bulb to replace, like the one of your low beam or your position lights, don’t be reluctant to read our blog posts to help you to accomplish this replacement.

Replacing the front turn signal bulb on your Fiat Punto

Now let’s go to the main part of this content, how to replace the front turn signal bulb of your Fiat Punto? Take note that this procedure is very simple, you will require to access, from the inside of your bonnet, through the wheel arch, or through your bumper to your headlight unit, open it and replace the burnt out front turn signal bulb of your Fiat Punto. If it is a bulb on your rear turn signal, see our dedicated content. Nevertheless, here are the details of the guidelines to follow to be able to perform this action correctly dependant on the approach you desire to choose.

Change front turn signal bulb on your Fiat Punto through the bonnet:

  • Open your bonnet and clear access to your headlight pods.
  • Use a torx tip to open the headlight unit on your car
  • Unscrew the front turn signal bulb from your car by turning it a quarter turn counterclockwise
  • Replace the front flasher bulb of your Fiat Punto by the new one (be sure to verify if it’s an orange or transparent bulb).
  • Reassemble and test that the brand-new front turn signal bulb functions.

    • Change the front turn signal bulb of your Fiat Punto through the wheel arch:

    This methodology is extremely valuable when you don’t have enough space in the bonnet to access the front turn signal on your car:

    • Lift your car, and take out the front wheel on the side you want to work on.
    • Take out your wheel arch with a torx bit.
    • Go to your headlamp block and replace the front turn signal bulb on your car following the same basic steps as on the part previously seen.

    Replace the front turn signal bulb of your Fiat Punto through the bumper:

    On some years or finishes, based on the options the only simple access you will have to replace the front turn signal bulb of your car will be to pass under your front bumper, there are only a few steps that change from the full process, we will describe them right now:

    • Put your Fiat Punto on a jack or a candle.
    • Remove the screws of the motor shoe of your car(plastic part under your motor) and your shock absorber. Beware with the plastic staples which can be fragile.
    • Remove your headlight block and replace the front turn indicator bulb of your Fiat Punto following the steps seen in the parts seen above.
    • Put the whole thing back together again.

    To get more tips on the Fiat Punto, take a look at the Fiat Punto category.