If you’re a bit of a do-it-yourselfer, you’re likely eager to manage most of the service to be completed on your Hyundai Ix35, but some are more complicated than others and require the removal of body parts or elements to access the component you want to focus on. We want to help you in this task. That’s why today we are going to see how to remove the bumper from a Hyundai Ix35. This action is not very complicated and you should be able to do it with few tools. For that, first we will discover how to remove the front bumper of your Hyundai Ix35, then how to remove the rear bumper of this one.
How to remove the front bumper from a Hyundai Ix35
So let’s start our content page with the front bumper of your Hyundai Ix35. To take it off, you will just need a set of ratchet wrenches, some screwdrivers and torx bits. Here are the guidelines you will have to adhere to in order to disassemble the bumper of your Hyundai Ix35 in good conditions:
- If you want to be more comfortable, we advise you to lift your Hyundai Ix35 and to remove the front wheels to have a perfect access to the whole front bumper.
- Open the bonnet of your motor vehicle: Seems evident, but you will need to have access to the bumper attachment in your engine compartment.
- Take off the wheel arches: They’re also named fenders, but they’ll get in the way and stop you from accessing all the screws on the front bumper of your Hyundai Ix35. Depending on your car features and the year of your model, you will also be able to find staples, to accomplish this, you will just have to use a staple extractor or to do it gently with a big flat screwdriver, and use a lever to open the staple.
- Then you will have to unscrew the screws that is in back of your mudguard and that seals the front bumper of your Hyundai Ix35 on the sides.
- Unscrew the screws or remove the clips on the upper part of the bumper in the engine compartment.
- Now it’s time to go underneath your Hyundai Ix35 to unscrew the bolts that are on the chassis of the car, you will find some in the middle of the bumper and on the sides.
- Be sure you disconnect the connection of the plate lighting and the distance control sensor if you have it.
- Carefully remove the front bumper by first unclipping the sides. If it doesn’t come off, you almost certainly forgot a screw or a clip. Think of employing a carpet or other to prevent that it gets scratched by touching the ground.
That’s it, you’ve seen all the steps of how to remove the front bumper from your Hyundai Ix35, to reassemble it adhere to the steps in the opposite direction.
How to remove the rear bumper from a Hyundai Ix35
And to finish, even if the process is quite identical, we will check out the case of removing the rear bumper from your Hyundai Ix35. For each step to avoid repeating ourselves we will only give you the broad outlines, refer to part 1 if you have any uncertainties or questions for more information.
- Start by undertaking the same first step, that is, lift your Hyundai Ix35 and take off your rear wheels in order to have an ideal working space to remove the bumper of your Hyundai Ix35 serenely
- Remove the rear wheel arches of your Hyundai Ix35 to access the side bumper side brackets
- Open your trunk
- Take off the side brackets in your wheel arches to make it less difficult to remove the bumper from your Hyundai Ix35.
- Take out the lower bindings below your Hyundai Ix35.
- At the same time, remember to disconnect the rear license plate light and the reverse radar sensors if you are equipped with them.
- Unscrew the top brackets from the top of the trunk.
- Now all you have to do is remove the rear bumper from your Hyundai Ix35, adhere to the same process as for the front bumper
Here, you have seen through these two parts, how to remove the bumper from a Hyundai Ix35 whether it is the front one or the rear one the solutions are almost the same and it is enough to be careful to make everything go well.
To discover more tips on the Hyundai Ix35, take a look at the Hyundai Ix35 category.
