Recent cars all come with an astounding number of technology, but, by reason of your budget or the year of your Ford F 550, you may not be lucky enough to have them all. Today we’re going to help you resolve this situation by telling you how to install parking sensor on my Ford F 550? Indeed, this option is very useful, particularly if you live in the city and have to park your car on the regular basis in narrow parking places. To help you out, we’ll first check out how parking sensors function, then we’ll check out how to install a parking reverse sensor on a Ford F 550, and to finish, how much does a parking sensor cost?
How does parking sensors work on an Ford F 550?
So we begin with the functioning of a parking sensor. As we told you in the introduction, this particularl interesting option enables you to know the distance between the back of your Ford F 550 and an obstacle when you move back. It is therefore particularly good for drivers who have to maneuver regularly, whose visibility is mediocre, or whose car size is big.
In many cases fitted as standard, the reverse sensors of a Ford F 550 integrate a set of sensors (minimum 4) that will be turned on with reverse gear and will spot obstacles in the vicinity. The technology employed is ultrasounds, which will send a signal that will bounce off the obstacle and be returned to the sensor. A computer will analyze the duration of this journey and calculate the distance between the obstacle and the radar. Generally you will have a sound indicator in the cabin which will enhance in level with the closeness of the obstacle and in some models a visual indicator in complement. The reversing radars of a Ford F 550 will enable you for parking, but as well for security and keeping away from pedestrians.
How to install parking sensors on a Ford F 550?
We now advance to the part that you are most likely most focused on, fitting reverse parking sensors on a Ford F 550. This section is for you if you don’t have a standard reserve sensor set up and you still desire to benefit of this technology, or if you have to replace a damaged one. You are fortunate people, it is possible to buy aftermarket parking sensors to install yourself on your Ford F 550.
How to change a faulty backup sensors on a Ford F 550
First we’ll see how to change a faulty parking sensor on an Ford F 550. If your Ford F 550 has suffered a rear collision and one of the sensors of your reversing radar has been broken, it will have to be swapped out to allow the system to function properly. Fortunately for you this procedure is extremely simple, you can even carry it out yourself without any particular mechanical skill:
- Get a replacement radar of the manufacturer’s brand name.
- Disconnect the old backup sensor from the back of the bumper.
- Take out the destroyed parking sensor from your Ford F 550, this part is extremely intuitive, it is only clipped on.
- Fit the new sensor and connect it.
- All you’ll have to do is test it to make sure it’s working properly.
- You will simply need to adhere to the installation instructions, but we summarize here the main guidelines.
- Take out the bumper if you don’t have access to the inside of it.
- Think about the best placement of the sensors to avoid blind spots, using the supplied drill bell, drill your bumper.
- Place your various sensors.
- Route the cables to the headlamp unit that contains your reverse light.
- Get the current from the wires to connect your parking sensors to this one.
- Try it out all out.
- Adhere to the installation manual which is accessible with some electrical knowledges.
- Find the best sensor position, either behind the bumper for the electromagnetic reversing sensor(adhesive tape) and or the different locations of the ultrasonic sensors.
- Glue them together and connect them using the box provided.
- Test it all out.
How to install an aftermarket parking sensor kit on an Ford F 550
Now we proceed to the section you’re almost certainly most focused on, how to install a reverse sensor set up on a Ford F 550 that doesn’t have one? As we said early on, you’re lucky because a good number of OEMs now sell aftermarket backup radar models. Nevertheless, the best performing and least fragile models will be models that fit into your bumper. We will concentrate on these models in this part. It is necessary to have some notions in electricity, and some notions in do-it-yourself to consider the installation of the kit. You will definitely have to remove the bumper of your Ford F 550 for the installation, do not hesitate to read our document on this subject matter to learn the process to follow. If you don’t feel like it, you can call a specialist, the process should take him between 1 and 2 hours, and for you around 3 hours.
Install a parking sensor without drilling on a Ford F 550
And to finish, we will now present you the installation of a drill-free parking sensors system on a Ford F 550. There are two kind, the ultrasounds more fragile because subjected to the shocks, and the electromagnetics which stick in back of the bumper and which are thus protected, it does not affect your bumper and will thus be easy to remove. This type of radar sticks on the bumper. The installation of these types of sensors will be similar.
What’s the price of parking sensors for a Ford F 550?
Price of replacing a faulty reversing parking sensor for an Ford F 550
The replacement of a broken reversing radar will depend on the model, but the price will range between 10 and 30 euros per sensor. It is necessary to count approximately one hundred euros for the installation of the kit by a specialist.
Price of an ultrasonic parking sensors with drilling for Ford F 550
For the models with holes there are many kits and different brands but you will have to count about 50 euros for a reliable kit.
Price of a parking sensors kit without drilling for a Ford F 550
.
At last, for the price of a reversing radar without drilling for your Ford F 550, whatever type you go for, you will have to pay between 30 and 60 euros.
If you need more guides on the Ford F 550, go to our Ford F 550 category.
