You’re uninterested in listening to cassettes and only being able to listent to the radio, while your smartphone is full of your preferred tracks but you don’t have a 3.5mm or usb port on your car radio, so you can’t appreciate your car travels to the fullest… That’s precisely why we’ve made this article content to help you, because right now you’re going to learn about how to install a car radio on your Vauxhall Corsa. To achieve this, first of all we will see how to remove the old car radio, then how to install a car radio on Vauxhall Corsa and to finish, how to connect it.
How to install car radio on Vauxhall Corsa: Removing the old car stereo
Before we begin the serious business of how to install a car stereo on your Vauxhall Corsa, there is one fundamental step, take away the audio set you already have on your car. There are two situations, either you have an original headunit, or you have an universal set. Before you start taking out, always remember to remove the negative wire from the battery to prevent any risk of short-circuit or electrocution. Once this is done, here are the two techniques based on the stereo that equips your Vauxhall Corsa:
- Original car radio:
In cases like this, you’ll have to be persistent, in most cases, the simple usage of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some specific models of specific years, this process will not be enough to remove the old car radio from your Vauxhall Corsa. Actually, you will need to remove certain parts of the centre console to access the car radio itself. To make this happen, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, remember to disconnect all the connections. - Aftermarket radio :
In this situation the method is easier, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is done, remember to unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve completed dismantling your old car radio, all you have to do is install the new one!
How to install car radio on your Vauxhall Corsa: Fitting and connecting the car radio
Let’s go to the essential part for you, how to install a car stereo on your Vauxhall Corsa. Beforehand, spend some time to examine the compatibility of your car and your headunit, and to read the installation instructions, which may give you specific recommendations.
Here are the various guidelines involved in installing an aftermarket car radio. To begin with, put in place the metal frame supplied with your new car radio, this frame has the task of holding your car radio in place on your Vauxhall Corsa, once placed, remember to press the locking tabs on each side of the frame. Once this step has been accomplished, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Vauxhall Corsa, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female to be able to adapt it to the socket of your new radio. Finally, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame supplied with it on its contour. That’s it, you’ve just learned how to install a car radio on Vauxhall Corsa, remember to check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other problems, or want to learn more about your car, don’t be reluctant to visit our page dedicated to it.
To get more tips on the Vauxhall Corsa, take a look at the Vauxhall Corsa category.
