It doesn’t matter if for your personal safety, for roadworthiness testing or to avoid a fine, by ensuring your turn signal bulbs are always functional is extremely important. In reality, bulbs are wearing parts that will inevitably burn out in the future and as a result need to be replaced. You’re quite likely on this website because one of your front turn signals is burnt out and you’re questioning how to change the bulb of a front turn signal on your Ford F 550, we’ve created this article content to help you do it alone and independently and not have to go to your auto technician. In a first section, we will look at the checking a burnt-out front turn signal bulb on your Ford F 550 and in a second section, how to change the front turn signal bulb on your car..

change-front-turn-bulb-ford-f-550

How to recognise if the front turn signal bulb on your Ford F 550 is burnt out or needs to be replaced?

When you drive your motor vehicle you don’t always have the opportunity to check all the safety equipments of your Ford F 550. In reality, you are in general in a rush and tend to enter into your motor vehicle, make your journey and put it down immediately without taking the time to do an occasional check-up. It is as a result relevant to take the time to occasionally check the state of your headlights and turn signals. It’s quite possible that you have a front turn signal on your Ford F 550, but that you didn’t notice it. Here are the two simple methods to verify if a front turn signal is burnt out or if you need to replace it quickly:

  • When you stop, turn on the ignition on your car, then alternately turn on your left and right front turn signals and get out of the car to verify that they are functional.
  • By listening to the sound of your blinkers. In reality, there is an audible indication on each car that alerts you of a front turn indicator bulb burnt out on your Ford F 550, you will identify that the time between each “click” is much shorter, this denotes that you will have to replace the front turn signal bulb or before. It’s up to you to check and check out which one is burnt out by a visual verify as on the first solution shown above.

You may have another bulb to replace, like the one of your low beam or your position lights, don’t be reluctant to browse our blog posts to help you to complete this replacement.

Changing the front turn signal bulb on your Ford F 550

Now let’s go to the most significant section of this article content, how to change the front turn signal bulb of your Ford F 550? Take note that this procedure is really easy, you will require to access, from the inside of your bonnet, through the wheel arch, or simply by your bumper to your headlight unit, open it and change the burnt out front turn signal bulb of your Ford F 550. If it is a bulb on your rear turn signal, see our specific article content. On the other hand, here are the details of the steps to follow in order to conduct this action properly dependant on the method you want to adopt.

Replace front turn signal bulb on your Ford F 550 through the bonnet:

  • Open your bonnet and clear access to your headlight pods.
  • Use a torx tip to open the headlight unit on your car
  • Unscrew the front turn signal bulb from your car by turning it a quarter turn counterclockwise
  • Replace the front flasher bulb of your Ford F 550 by the new one (be sure to check if it’s an orange or transparent bulb).
  • Reassemble and check that the new front turn signal bulb is effective.
  • Replace the front turn signal bulb of your Ford F 550 through the wheel arch:

    This procedure is extremely valuable when you don’t have enough space in the bonnet to access the front turn signal on your car:

    • Lift your car, and take out the front wheel on the side you want to work on.
    • Take out your wheel arch with a torx bit.
    • Go to your headlamp block and replace the front turn signal bulb on your car following the same procedures as on the part previously seen.

    Replace the front turn signal bulb of your Ford F 550 through the bumper:

    On some years or finishes, depending on the options the only simple access you will have to replace the front turn signal bulb of your car will be to pass under your front bumper, there are only a few steps that change from the full procedure, we will describe them right now:

    • Put your Ford F 550 on a jack or a candle.
    • Remove the screws of the motor shoe of your car(plastic part under your motor) and your shock absorber. Be mindful with the plastic staples which can be breakable.
    • Take out your headlight block and replace the front turn indicator bulb of your Ford F 550 following the steps seen in the parts seen above.
    • Put the whole thing back together again.

    To discover more tips on the Ford F 550, take a look at the Ford F 550 category.