You’re tired of listening to cassettes and only being able to enjoy the radio, while your smartphone is loaded with your favourite music file but you don’t have a 3.5mm or usb port on your car radio, so you can’t appreciate your car journeys to the fullest… That’s specifically why we’ve created this content to help you, because now you’re going to find out how to install a car radio on your Land Rover LR4. To accomplish this, first of all we will find out how to remove the old car radio, then how to install a car radio on Land Rover LR4 and to finish, how to connect it.
How to install car radio on Land Rover LR4: Removing the old car stereo
Before we start the serious business of how to install a car stereo on your Land Rover LR4, there is one imperative step, take off the audio set you already have on your car. There are two situations, either you have an original headunit, or you have an universal set. Before you start taking out, always be sure you remove the negative cable from the battery to prevent any risk of short-circuit or electrocution. Once this is carried out, here are the two methods according to the stereo that equips your Land Rover LR4:
- Original car radio:
In this instance, you’ll have to be patient, generally, the simple use of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some particular models of specific years, this operation will not be enough to remove the old car radio from your Land Rover LR4. In actual fact, you will need to remove certain parts of the centre console to access the car radio itself. To make this happen, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, be sure you disconnect all the connections. - Aftermarket radio :
In this circumstance the method is much easier, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is carried out, be sure you unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve accomplished dismantling your old car radio, all you have to do is install the new one!
How to install car radio on your Land Rover LR4: Fitting and connecting the car radio
Let’s go to the most important section for you, how to install a car stereo on your Land Rover LR4. Beforehand, take the time to examine the suitability of your car and your headunit, and to read the installation recommendations, which may give you specific guidelines.
Here are the various guidelines involved in installing an aftermarket car radio. First of all, put in place the metal frame supplied with your new car radio, this frame has the role of holding your car radio in place on your Land Rover LR4, once situated, be sure you press the locking tabs on each side of the frame. Once this step has been accomplished, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Land Rover LR4, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female to be able to adapt it to the socket of your new radio. Finally, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame supplied with it on its contour. That’s it, you’ve just discovered how to install a car radio on Land Rover LR4, be sure you check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other concerns, or want to learn more about your car, don’t hesitate to visit our page dedicated to it.
To discover more tips on the Land Rover LR4, take a look at the Land Rover LR4 category.
