You’re bored with listening to cassettes and only having the capability to enjoy the radio, while your smartphone is full of your preferred music file but you don’t have a 3.5mm or usb port on your car radio, so you can’t appreciate your car travels to the fullest… That’s exactly why we’ve made this content to help you, because in this article you’re going to learn about how to install a car radio on your Ford Fiesta. To make this happen, first we will see how to remove the old car radio, then how to install a car radio on Ford Fiesta and to finish, how to connect it.
How to install car radio on Ford Fiesta: Removing the old car stereo
Before we begin the serious business of how to install a car stereo on your Ford Fiesta, there is one necessary task, take out the audio set you currently have on your car. There are two cases, either you have an original headunit, or you have an universal set. Before you start dismantling, always be sure you remove the negative cable from the battery to avoid any risk of short-circuit or electrocution. Once this is conducted, here are the two methods dependant upon the stereo that equips your Ford Fiesta:
- Original car radio:
In this case, you’ll have to be persistent, in most cases, the simple usage of extracting clamps in the 4 holes in the corners of the car radio should be enough to remove it. But on some specific models of specific years, this procedure will not be enough to remove the old car radio from your Ford Fiesta. In truth, you will need to remove certain auto parts of the centre console to access the car radio itself. To do this, you will need to use a screwdriver to remove the plastic covers that are in the way. Once you have access to the station, be sure you disconnect all the connections. - Aftermarket radio :
In this circumstance the procedure is less difficult, you will just have to use the extracting clamps and press on the 4 corners of your station to make it come out of its place. Once this step is conducted, be sure you unplug it and remove the metal frame that supports it in the notch of the center console. That’s it, you’ve accomplished dismantling your old car radio, all you have to do is install the new one!
How to install car radio on your Ford Fiesta: Fitting and connecting the car radio
Let’s go to the essential step for you, how to install a car stereo on your Ford Fiesta. Beforehand, take the time to examine the compatibility of your car and your headunit, and to read the installation instructions, which may give you specific instructions.
Here are the various guidelines required in installing an aftermarket car radio. First of all, put in place the metal frame provided with your new car radio, this frame has the job of holding your car radio in place on your Ford Fiesta, once placed, be sure you press the locking tabs on each side of the frame. Once this step has been finished, you will need to connect the three plugs of your car radio, two ISO connectors for power supply and sound transfer to the speakers of your Ford Fiesta, then the radio antenna socket. For the latter, on some models you may need an adapter to transform it from male to female in order to adapt it to the socket of your new radio. Finally, all you have to do is push your car radio into the metal frame, snap it into place, and position the plastic or metal frame provided with it on its contour. That’s it, you’ve just learned how to install a car radio on Ford Fiesta, be sure you check that the radio is switched on, that the sound is working and that you’re picking up the radio and you’re ready to enjoy your new car radio. If you have other complications, or want to learn more about your car, don’t hesitate to visit our page dedicated to it.
In the event that you have any further questions about the Ford Fiesta, do not hesitate to consult our Ford Fiesta category.
