No matter if it’s for your personal security, for roadworthiness evaluation or to prevent a fine, making sure your turn signal bulbs are always functioning is extremely important. In reality, bulbs are wearing devices that will surely burn out as time passes and consequently need to be replaced. You’re likely on this website because one of your rear turn signals is burnt out and you’re worried about how to change the bulb of a rear turn signal on you Ram P/U, we’ve made this article to help you do it without any help without having to go to your technician. To begin , we will look at inspecting a burnt-out rear turn signal bulb on your Ram P/U and in a second step, how to replace the rear turn signal bulb on your Ram P/U.
How to be sure if the rear turn signal bulb on your Ram P/U is burnt-out or needs to be replaced?
When you drive your vehicle you don’t always have the opportunity to examine all the security features of your Ram P/U. In reality, you are generally on the go and are likely to get into your vehicle, make your trip and put it down immediately without taking the time to do an occasional check-up. It is as a result fundamental to take a little time to in some instances examine the condition of your headlights and turn signals. It’s quite possible that you have a burnt-out rear turn signal on your Ram P/U, but you didn’t perceive it. Here are the two ordinary solutions to examine if a rear turn signal on your car is out of order or if you need to replace it quickly:
- When you stop, turn on the ignition on your Ram P/U, then alternately turn on your left and right rear turn signals and get out of the car to examine that they are functioning.
- By listening to the sound of your turn signals. In actual fact, there is an audible indicator on each car that alerts you of a rear turn signal bulb burnt out on your Ram P/U, you will recognise that the time between each “click” is much closer, this means that you will have to replace the rear turn signal bulb or before. It’s up to you to check and verify which one is burnt out by a visual check as on the first procedure shown above.
You may have another bulb to replace, like the one of your low beam Ram P/U or your position lights on Ram P/U, don’t be reluctant to browse our articles to help you to achieve this substitution.
Changing the rear turn signal bulb on my Ram P/U
Now let’s go to the most instersting step of this content page, how to replace the rear turn signal bulb on Ram P/U? Take note that this operation is quite easy, you will need to access, from the inside of your trunk, your headlight unit, open it and change the burnt out rear turn signal bulb on your car. If it is a bulb on your front turn signal on your Ram P/U, see our specific content page. Nevertheless, here are the detailed steps to follow to be able to conduct this work correctly:
- To access the tail light assembly, remove the carpeting or plastic cover to access the tail light assembly.
- Use a screwdriver or torx wrench (6-pointed star) to open the tail light assembly.
- Take off the rear indicator bulb from your burnt-out turn signal that you have previously identified by an external visual inspection, for this you will need to make a quarter turn in a counter-clockwise way
- Change the rear turn signal bulb on your Ram P/U. There are two types of bulbs, transparent bulbs when the cover is orange, or orange bulbs when the cover is transparent, select the right model for your car
- Remount your rear turn signal bulb and close your tail light block, then, examine your new turn signal bulb is functioning in the right way
.
If you have any additional questions about the Ram P/U, do not hesitate to consult our Ram P/U category.
