Whether for your personal security, for roadworthiness evaluation or to prevent a fine, making sure your turn signal bulbs are constantly functional is fundamental. Surely, bulbs are wearing devices that will inevitably burn out over time and as a result need to be replaced. You’re certainly here because one of your rear turn signals is burnt out and you’re concerned about how to change the bulb of a rear turn signal on you Scion xB, we’ve created this content to teach you do it by yourself without having to go to your mechanic. To begin , we will look at inspecting a burnt-out rear turn signal bulb on your Scion xB and in a second step, how to change the rear turn signal bulb on your Scion xB.
How to find out if the rear turn signal bulb on your Scion xB is burnt-out or needs to be changed?
When you drive your vehicle you don’t constantly have the occasion to verify all the security features of your Scion xB. Surely, you are often times on the go and are likely to get into your vehicle, make your trip and put it down right away without taking the time to do an occasional check-up. It is as a result necessary to take the time to on occasions verify the condition of your headlights and turn signals. It’s quite possible that you have a burnt-out rear turn signal on your Scion xB, but you didn’t become aware of it. Here are the two basic methods to verify if a rear turn signal on your car is out of order or if you need to change it quickly:
- When you stop, turn on the ignition on your Scion xB, then alternately turn on your left and right rear turn signals and get out of the car to verify that they are operational.
- By listening to the sound of your turn signals. In actual fact, there is an audible signal on each car that notifies you of a rear turn signal bulb burnt out on your Scion xB, you will notice that the time between each “click” is much closer, this means that you will have to change the rear turn signal bulb or before. It’s up to you to examine and verify which one is burnt out by a visual check as on the first methodology shown above.
You may have another bulb to change, like the one of your low beam Scion xB or your position lights on Scion xB, don’t be reluctant to have a look at our content articles to help you to realize this replacement.
Changing the rear turn signal bulb on my Scion xB
Now let’s go to the most important step of this guideline, how to change the rear turn signal bulb on Scion xB? You should be aware that this procedure is fairly simple, you will need to access, from the inside of your trunk, your headlight unit, open it and replace the burnt out rear turn signal bulb on your car. If it is a bulb on your front turn signal on your Scion xB, see our specific guideline. On the other hand, here are the detailed steps to adhere to in order to execute this process properly:
- To access the tail light assembly, take off the carpeting or plastic cover to access the tail light assembly.
- Use a screwdriver or torx wrench (6-pointed star) to open the tail light assembly.
- Take off the rear indicator bulb from your burnt-out turn signal that you have earlier in this article diagnosed by an external visual inspection, for this you will need to make a quarter turn in a counter-clockwise way
- Change the rear turn signal bulb on your Scion xB. There are two sort of bulbs, transparent bulbs when the cover is orange, or orange bulbs when the cover is transparent, choose the right model for your car
- Put back in place your rear turn signal bulb and close your tail light block, then, verify your new turn signal bulb is operating in the right way
.
To find more tips on the Scion xB, take a look at the Scion xB category.
