Whether for your own security, for roadworthiness tests or to prevent a fine, making sure your turn signal bulbs are all the time functioning is very important. Indeed, bulbs are wearing parts that will predictably burn out with time and therefore need to be replaced. You’re probably here because one of your rear turn signals is burnt out and you’re trying to figure out how to change the bulb of a rear turn signal on you Jeep Cherokee, we’ve written and published this content to help you do it all on your own without having to go to your auto technician. In a first step, we will have a look at the checking a burnt-out rear turn signal bulb on your Jeep Cherokee and in a second step, how to replace the rear turn signal bulb on your Jeep Cherokee.

change-rear-turn-bulb-jeep-cherokee

How to find out if the rear turn signal bulb on your Jeep Cherokee is burnt-out or needs to be replaced?

When you drive your vehicle you don’t all the time have the opportunity to examine all the security features of your Jeep Cherokee. Indeed, you are often times in a hurry and are likely to get into your vehicle, make your trip and put it down immediately without taking the time to do an occasional check-up. It is due to this fact essential to take the time to on occasions examine the condition of your headlights and turn signals. It’s quite possible that you have a burnt-out rear turn signal on your Jeep Cherokee, but you didn’t perceive it. Here are the two basic methods to examine if a rear turn signal on your car is out of order or if you need to replace it as soon as possible:

  • When you stop, turn on the ignition on your Jeep Cherokee, then alternately turn on your left and right rear turn signals and get out of the car to examine that they are efficient.
  • By paying attention to the sound of your turn signals. Indeed, there is an audible warning on each car that notifies you of a rear turn signal bulb burnt out on your Jeep Cherokee, you will detect that the time between each “click” is much shorter, this involves that you will have to replace the rear turn signal bulb or before. It’s up to you to check and verify which one is burnt out by a visual check as on the first strategy shown above.

You may have another bulb to replace, like the one of your low beam Jeep Cherokee or your position lights on Jeep Cherokee, don’t be reluctant to consult our content articles to help you to do this substitution.

Replacing the rear turn signal bulb on my Jeep Cherokee

Now let’s go to the most instersting step of this article, how to replace the rear turn signal bulb on Jeep Cherokee? Take note that this operation is fairly simple, you will need to access, from the inside of your trunk, your headlight unit, open it and change the burnt out rear turn signal bulb on your car. If it is a bulb on your front turn signal on your Jeep Cherokee, see our dedicated guideline. Nevertheless, here are the detailed steps to stick to to be able to execute this process correctly:

  • To access the tail light assembly, take out the carpeting or plastic cover to access the tail light assembly.
  • Use a screwdriver or torx wrench (6-pointed star) to open the tail light assembly.
  • Take off the rear indicator bulb from your burnt-out turn signal that you have earlier in this article identified by an external visual inspection, for this you will need to make a quarter turn in a counter-clockwise way
  • Change the rear turn signal bulb on your Jeep Cherokee. There are two kind of bulbs, transparent bulbs when the cover is orange, or orange bulbs when the cover is transparent, choose the right model for your car
  • .

  • Put back in place your rear turn signal bulb and close your tail light block, then, examine your new turn signal bulb is working effectively

If you want more guides on the Jeep Cherokee, go to our Jeep Cherokee category.