Some maintenance actions such as changing the engine unit oil might seem obvious and very important, while others such as changing the gearbox oil from its Ram P/U may appear to be less natural. Nevertheless, make no mistake, changing the gearbox is just as important as changing the engine unit oil. This guideline will explain the function of the gearbox oil, then, why it is important to replace the gearbox of your Ram P/U, and at last, how to replace the gearbox oil of a Ram P/U .
Purpose of gearbox oil on a Ram P/U
So we start our guideline with the function of gearbox oil on a Ram P/U. The objective of this short introduction is to make you understand the benefit of this fluid which ensures the good working of your motor vehicle. The gearbox of your car has the mission to demultiply the power transferred by the engine unit and send it back to your wheels . It is done up of pinions and gears that will allow the wheels to rotate at different speeds depending on the curves and the gear engaged. It will operate with the help of an axle and a differential. All these auto parts will need to be firmly lubricate to function accurately, limit friction and tolerate the high temperatures generated by the engine unit and friction. Your transmission oil has a high viscosity and will prevent the formation of filings or gear breakage, so it is essential to the correct functioning of the gearbox.
Why replacing the gearbox oil from a Ram P/U?
Now we’ll discover what’s the point of draining the gearbox oil of your Ram P/U?
Interest of gearbox oil changing Ram P/U
There are several concerns to replace the gearbox of your motor vehicle regularly, we will list them and outline them below:
- With time, the oil will lose its viscosity due to friction and temperature rise, which will lead to less lubrication of the gears and pinions and therefore risk to break some of them.
- Same as viscosity, time and temperature rise will decrease the oil resistance to the engine unit temperature, So it will fluidize much more easily when the engine heats up, which is not good for your gearbox.
- Accumulation of metallic residues: Finally, even if you always have a quality oil, a gearbox is an component that wears out and releases iron filings with friction, the oil will pick them up and if it gathers up too much these residues can get into gears and break them.
When to do the gearbox oil replace on a Ram P/U?
If you want to do an automatic or manual gearbox oil change on Ram P/U or strong> the procedure is not similar, however, dealers do not give mileage suggestions to replace the oil in your gearbox, however when you do an intervention on the gearbox it is advisable to replace it, otherwise here are the reasons to make you take into consideration doing this oil replace.
Oil replace for manual gearbox Ram P/U
- Gears are jumping: you are probably missing oil and you may have a gearbox oil leak, please discover our article on gearbox leaks on Ram P/U for more info.
- The gearbox cracks when you switch gears: The oil has absolutely lost viscosity and is too fluid, so the gears get stuck.
- Difficulty to shift gears: Same issue as just before, the oil is most certainly too fluid.
Automatic gearbox oil replace
- A slow start from the neutral position to the first one: often a viscosity issue.
- Difficulty or even impossibility to shift gears: Lack of oil
.
How to replace gearbox oil of a Ram P/U?
Finally, to finish this article, we will explain you how to empty the gearbox oil of your Ram P/U , it’s easier than you might presume, here are the few guidelines to follow to do it accurately:
- Heat your Ram P/U for about 10 minutes to get a fluid oil, place it flat on 4 stands.
- Install a drain pan under the drain plug, open it, and clean it well because it will probably collect filings.
- Let all the oil run out until it’s all gone.
- Replace and tighten the cap, then fill with a syringe through the filler cap with the manufacturer’s recommended dose
If you wish more tutorials on the Ram P/U, go to our Ram P/U category.
