Regardless whether it’s for your own security, for roadworthiness tests or to avoid a fine, being certain your headlamp bulbs are always operational is necessary. In fact, bulbs are wearing parts that will inevitably burn out after awhile and therefore need to be replaced. You’re most certainly on this site because one of your parking lights is burnt out and you’re struggling with how to change your Toyota Yaris 2’s license plate bulb, we’ve made this content to help you do it on your own and not have to go to your mechanic. Firstly, we will examine changing the license plate bulb from the outside, secondly, how to replace the license plate bulb without outside access, and thirdly, how to replace the rear license plate bulb of your Toyota Yaris 2.
How to replace the license plate bulb on your Toyota Yaris 2 throughout the outside
This tactic is the most simple of the two, in truth, for this one you will simply have to remove the protective covers of the bulbs. Sadly on some years or packages of car these covers do not open from the outside and if this is the situation we will dedicate a moment on in the second section of this content to clarify the way.
So let’s start with replacing the number plate bulb by going through the outside of your Toyota Yaris 2. Regardless whether it’s the front or the back of your motor vehicle the operation will be the same.
Here are a few simple actions to stick to to carry out this maintenance tasks:
- With the engine turned off, unplug the battery terminals from your car
- Face your license plate and use a flat screwdriver or knife to place the flat part into the notch supplied for this intent (generally on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Toyota Yaris 2
- Use your screwdriver or knife to remove the bulb from its location, in the event you are worried of breaking anything, you can as well do it with your fingers.
- Finally, put the new license plate light bulb
- Last stage, before reassembling, reconnect your battery and verify the light to confirm the successfulness of the operation.
.
How to replace the number plate bulb on your Toyota Yaris 2 without outside access
Second section of our item, swap this license plate bulb on your Toyota Yaris 2 without external access. Most often you will be able to access it, but some series (often at the rear does not allow this access).
How to replace the front license plate bulb on my Toyota Yaris 2
To replace the one on the front plate, nothing could be easier, you will have to put yourself under the motor vehicle (preferably put on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, generally held by two soft plastic tabs by pressing on both simultaneously, then right after you have your license plate bulb block in hand, Take away the plastic that works as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (take extra care not to exert too much pressure or you will break the plastic cover), and you will simply have to remove the burnt-out license plate bulb and change it with the new , then test out and reassemble the whole thing.
How to replace the rear license plate bulb on my Toyota Yaris 2
Finally last option, you must replace the bulb on the backplate of your Toyota Yaris 2, but you cannot really open the cover from the outside of your motor vehicle. In such a case, here is the technique to do this task:
- Disconnect the battery from your Toyota Yaris 2
- Identify the position of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, held by clips, you will have to lever delicately on all the frame of the trunk to remove it.
- Once located, before removing the bulb holders, unplug the holders for easier access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Change the burnt-out license plate bulb on your Toyota Yaris 2, verify it and reassemble it, watching the clips on the trunk liner
.
.
There you have it, you have discovered the main solutions for replacing license plate bulbs on your car, be aware that on some models the technique may be a bit different but you should be able to accomplish it following the explanation of this article content. If you can’t do it, don’t be reluctant to go to your mechanic it would be a shame to break a part of your Toyota Yaris 2. If you wish to change other bulbs like the position light bulbs on your Toyota Yaris 2 or the low beam bulbs on Toyota Yaris 2, don’t be reluctant to consult our content articles which demonstrate you the operation to follow.
If you need more guides on the Toyota Yaris 2, go to our Toyota Yaris 2 category.
