Whether it’s for your specific safety, for roadworthiness tests or to avoid a fine, ensuring that your headlamp bulbs are always functioning is really important. Indeed, bulbs are wearing auto parts that will obviously burn out as time passes and therefore need to be swapped out. You’re almost certainly on the website because one of your parking lights is burnt out and you’re wondering how to change your Bmw Serie 6’s license plate bulb, we’ve made this content to help you do it without any help and not have to go to your technician. Firstly, we will take a look at changing the license plate bulb from the outside, secondly, how to replace the license plate bulb without outside access, and thirdly, how to replace the rear license plate bulb of your Bmw Serie 6.
How to change the license plate bulb on your Bmw Serie 6 through the outside
This tactic is the most simple of the two, in truth, for this one you will only require to remove the protective covers of the bulbs. Regrettably on some years or packages of car these covers do not open from the outside and if this is the situation we will dedicate some time on in the second section of this article content to show you the method.
So let’s start with replacing the number plate bulb by going through the outside of your Bmw Serie 6. Whether it’s the front or the back of your automobile the method will be the same.
Here are a few simple guidelines to stick to to execute this maintenance:
- With the engine turned off, disconnect the battery terminals from your car
- Position yourself in front of your license plate and use a flat screwdriver or knife to insert the flat part into the notch provided for this purpose (generally on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Bmw Serie 6
- Use your screwdriver or knife to remove the bulb from its place, if you are afraid of destroying something, you can as well do it with your fingers.
- Finally, position the new license plate light bulb
- Last stage, before reassembling, reconnect your battery and test the light to validate the successfulness of the process.
.
How to replace the number plate bulb on your Bmw Serie 6 without outside access
Second section of our item, replace this license plate bulb on your Bmw Serie 6 without external access. Generally you will be able to access it, however some series (often at the rear does not allow this access).
How to change the front license plate bulb on my Bmw Serie 6
To change the one on the front plate, nothing could be easier, you will have to position yourself under the automobile (ideally positioned on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, generally held by two soft plastic tabs by pressing on both at once, then once you have your license plate bulb block in hand, Take off the plastic that works as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (take care not to put in too much force or you will break the plastic cover), and you will only have to remove the burnt-out license plate bulb and replace it with the new , then verify and reassemble the whole thing.
How to change the rear license plate bulb on my Bmw Serie 6
Finally last option, you must change the bulb on the backplate of your Bmw Serie 6, but you simply cannot open the cover from the outside of your automobile. In such a case, here is the method to perform this task:
- Disconnect the battery from your Bmw Serie 6
- Find the location of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, held by clips, you will have to lever softly on all the frame of the trunk to remove it.
- Once found, before removing the bulb holders, disconnect the holders for much easier access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Replace the burnt-out license plate bulb on your Bmw Serie 6, test it and reassemble it, watching the clips on the trunk liner
.
.
There you have it, you have learned the main ways for replacing license plate bulbs on your car, remember that on some models the methodology may be a bit different but you should be able to accomplish it following the explanation of this content page. If you can’t do it, don’t be reluctant to go to your mechanic it would be a shame to break a part of your Bmw Serie 6. If you want to change other bulbs like the position light bulbs on your Bmw Serie 6 or the low beam bulbs on Bmw Serie 6, don’t be reluctant to consult our articles which explain you the process to follow.
To discover more tips on the Bmw Serie 6, take a look at the Bmw Serie 6 category.
