Regardless it’s for your specific security, for roadworthiness tests or to avoid a fine, being certain your headlamp bulbs are always working is very important. Indeed, bulbs are wearing parts that will surely burn out after awhile and as a result need to be swapped out. You’re quite likely on this website because one of your parking lights is burnt out and you’re wanting to know how to change your Volkswagen Transporter 5’s license plate bulb, we’ve made this document to help you do it without any help and not have to go to your motor mechanic. Firstly, we will take a look at changing the license plate bulb from the outside, secondly, how to replace the license plate bulb without outside access, and thirdly, how to replace the rear license plate bulb of your Volkswagen Transporter 5.

change-license-plate-bulb-volkswagen-transporter-5

How to change the license plate bulb on your Volkswagen Transporter 5 coming from the outside

This solution is the most simple of the two, in fact, for this one you will just need to remove the protective covers of the bulbs. Unfortunately on some years or packages of car these covers do not open from the outside and if this is the situation we will dedicate some time on in the second section of this document to clarify the way.
So let’s start with swapping the number plate bulb by going through the outside of your Volkswagen Transporter 5. Regardless it’s the front or the back of your motor vehicle the method will be identical.
Here are a few simple actions to stick to to execute this service:

  • With the engine turned off, unplug the battery terminals from your car
  • Position yourself in front of your license plate and use a flat screwdriver or knife to insert the flat part into the notch assigned for this intent (almost always on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Volkswagen Transporter 5
  • .

  • Use your screwdriver or knife to remove the bulb from its spot, if you are worried of breaking a thing, you can also do it with your fingers.
  • Finally, position the new license plate light bulb
  • Last stage, before reassembling, reconnect your battery and verify the light to validate the success of the operation.

How to change the number plate bulb on your Volkswagen Transporter 5 without outside access

Second section of our content page, change this license plate bulb on your Volkswagen Transporter 5 without external access. Generally you will be able to access it, but some series (often at the rear does not allow this access).

How to change the front license plate bulb on my Volkswagen Transporter 5

To change the one on the front plate, nothing could be less hard, you will have to position yourself under the motor vehicle (preferably positioned on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, almost always kept by two soft plastic tabs by pressing on both simultaneously, then right after you have your license plate bulb block in hand, Take out the plastic that works as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be attentive not to put in too much pressure otherwise you will break the plastic cover), and you will simply have to remove the burnt-out license plate bulb and swap it with the new , then check and reassemble the whole thing.

How to change the rear license plate bulb on my Volkswagen Transporter 5

Finally last solution, you must change the bulb on the backplate of your Volkswagen Transporter 5, but you are not able to open the cover from the outside of your motor vehicle. In this instance, here is the method to do this task:

  • Unplug the battery from your Volkswagen Transporter 5
  • Find the spot of your light bulbs from the outside.
  • From the inside of the trunk, you have to remove the lining of the trunk, kept by clips, you will have to lever gently on all the frame of the trunk to remove it.
  • Once located, before removing the bulb holders, unplug the holders for much easier access.
  • Using a screwdriver, lever the two plastic parts to remove the bulb holder
  • .

  • Change the burnt-out license plate bulb on your Volkswagen Transporter 5, verify it and reassemble it, paying attention to the clips on the trunk liner

.
There you have it, you have learned the main ways for swapping license plate bulbs on your car, remember that on some models the methodology may be a bit different but you should be able to accomplish it following the explanation of this article content. If you can’t do it, don’t hesitate to go to your mechanic it would be a shame to break a part of your Volkswagen Transporter 5. If you desire to change other bulbs like the position light bulbs on your Volkswagen Transporter 5 or the low beam bulbs on Volkswagen Transporter 5, don’t hesitate to consult our articles which explain you the procedure to follow.

If you have any further questions about the Volkswagen Transporter 5, do not hesitate to consult our Volkswagen Transporter 5 category.