Regardless whether it’s for your own security, for roadworthiness testing or to avoid a fine, making sure your headlamp bulbs are all the time functional is extremely important. In reality, bulbs are wearing auto parts that will undoubtedly burn out with time and consequently need to be replaced. You’re almost certainly here because one of your parking lights is burnt out and you’re wanting to know how to change your Renault Scenic 2’s license plate bulb, we’ve created this article to help you do it by yourself and not have to go to your auto technician. Firstly, we will take a look at changing the license plate bulb from the outside, secondly, how to replace the license plate bulb without outside access, and thirdly, how to replace the rear license plate bulb of your Renault Scenic 2.
How to swap the license plate bulb on your Renault Scenic 2 coming from the outside
This technique is the most simple of the two, in truth, for this one you will just require to take out the protective covers of the bulbs. Sadly on some years or packages of car these covers do not open from the outside and if this is the case we will spend some time on in the second part of this content to explain the way.
So let’s begin with changing the number plate bulb by going through the outside of your Renault Scenic 2. Regardless whether it’s the front or the back of your motor vehicle the operation will be the same.
Here are a few simple actions to stick to to execute this routine service:
- With the engine turned off, unplug the battery terminals from your car
- Face your license plate and use a flat screwdriver or knife to insert the flat part into the notch assigned for this purpose (almost always on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Renault Scenic 2
- Use your screwdriver or knife to remove the bulb from its spot, in the event that you are afraid of breaking a thing, you can also do it with your fingers.
- Finally, position the new license plate light bulb
- Last stage, before reassembling, reconnect your battery and verify the light to confirm the success of the task.
.
How to change the number plate bulb on your Renault Scenic 2 without outside access
Second part of our document, change this license plate bulb on your Renault Scenic 2 without external access. Most often you will be able to access it, nevertheless some series (often at the rear does not allow this access).
How to swap the front license plate bulb on my Renault Scenic 2
To swap the one on the front plate, nothing could be less hard, you will have to position yourself under the motor vehicle (ideally positioned on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, almost always kept by two soft plastic tabs by pressing on both at the same time, then now that you have your license plate bulb block in hand, Take off the plastic that acts as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be careful not to exert too much pressure otherwise you will break the plastic cover), and you will just have to take out the burnt-out license plate bulb and swap it with the new , then test and reassemble the whole thing.
How to swap the rear license plate bulb on my Renault Scenic 2
Finally last possibility, you must swap the bulb on the backplate of your Renault Scenic 2, but you simply cannot open the cover from the outside of your motor vehicle. In this case, here is the method to accomplish this operation:
- Unplug the battery from your Renault Scenic 2
- Locate the spot of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, kept by clips, you will have to lever softly on all the frame of the trunk to remove it.
- Once located, before removing the bulb holders, unplug the holders for much easier access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Change the burnt-out license plate bulb on your Renault Scenic 2, verify it and reassemble it, paying attention to the clips on the trunk liner
.
.
There you have it, you have discovered the main solutions for changing license plate bulbs on your car, be aware that on some models the method may be a bit different but you should be able to realize it following the explanation of this content. If you can’t do it, don’t be reluctant to go to your mechanic it would be a shame to break a part of your Renault Scenic 2. If you desire to change other bulbs like the position light bulbs on your Renault Scenic 2 or the low beam bulbs on Renault Scenic 2, don’t be reluctant to browse our articles which explain you the process to follow.
If you need more guides on the Renault Scenic 2, go to our Renault Scenic 2 category.
