Regardless it’s for your personal security, for roadworthiness testing or to avoid a fine, ensuring that your headlamp bulbs are constantly effective is really important. In reality, bulbs are wearing units that will surely burn out with time and as a consequence need to be changed. You’re likely on this website because one of your parking lights is burnt out and you’re wondering how to change your Renault Kangoo 2’s license plate bulb, we’ve made this content page to help you do it on your own and not have to go to your auto technician. Firstly, we will take a look at changing the license plate bulb from the outside, secondly, how to replace the license plate bulb without outside access, and thirdly, how to replace the rear license plate bulb of your Renault Kangoo 2.
How to swap the license plate bulb on your Renault Kangoo 2 through the outside
This method is the easiest of the two, actually, for this one you will simply need to take off the protective covers of the bulbs. Unfortunately on some years or packages of car these covers do not open from the outside and if this is the case we will take a moment on in the second section of this content to explain the method.
So let’s start with swapping the number plate bulb by going through the outside of your Renault Kangoo 2. Regardless it’s the front or the back of your motor vehicle the technique will be identical.
Here are a few simple guidelines to stick to to conduct this service:
- With the engine off, disconnect the battery terminals from your car
- Face your license plate and use a flat screwdriver or knife to place the flat part into the notch supplied for this intent (generally on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Renault Kangoo 2
- Use your screwdriver or knife to eject the bulb from its location, in the event that you are worried of destroying something, you can as well do it with your fingers.
- Finally, position the new license plate light bulb
- Last step, before reassembling, reconnect your battery and verify the light to confirm the success of the process.
.
How to change the number plate bulb on your Renault Kangoo 2 without outside access
Second section of our article, change this license plate bulb on your Renault Kangoo 2 without external access. In most cases you will be able to access it, however some series (often at the rear does not allow this access).
How to swap the front license plate bulb on my Renault Kangoo 2
To swap the one on the front plate, nothing could be easier, you will have to position yourself under the motor vehicle (preferably positioned on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, generally held by two soft plastic tabs by pressing on both simultaneously, then once you have your license plate bulb block in hand, Take out the plastic that works as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be mindful not to exert too much pressure otherwise you will break the plastic cover), and you will only have to take off the burnt-out license plate bulb and replace it with the new , then check and reassemble the whole thing.
How to swap the rear license plate bulb on my Renault Kangoo 2
Finally last solution, you must swap the bulb on the backplate of your Renault Kangoo 2, but you simply cannot open the cover from the outside of your motor vehicle. In this instance, here is the tactic to do this operation:
- Disconnect the battery from your Renault Kangoo 2
- Find the spot of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, held by clips, you will have to lever gently on all the frame of the trunk to remove it.
- Once found, before removing the bulb holders, disconnect the holders for much easier access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Change the burnt-out license plate bulb on your Renault Kangoo 2, verify it and reassemble it, watching the clips on the trunk liner
.
.
There you have it, you have found out the main techniques for swapping license plate bulbs on your car, take note that on some models the methodology may be a bit different but you should be able to do it following the explanation of this content page. If you can’t do it, don’t hesitate to go to your workshop it would be a shame to break a part of your Renault Kangoo 2. If you wish to change other bulbs like the position light bulbs on your Renault Kangoo 2 or the low beam bulbs on Renault Kangoo 2, don’t hesitate to browse our content articles which demonstrate you the process to follow.
Whenever you have any further questions about the Renault Kangoo 2, do not hesitate to consult our Renault Kangoo 2 category.
