It doesn’t matter if it’s for your personal security, for roadworthiness testing or to avoid a fine, being sure your headlamp bulbs are always effective is extremely important. In fact, bulbs are wearing auto parts that will inevitably burn out over the years and as a consequence need to be replaced. You’re almost certainly on this site because one of your parking lights is burnt out and you’re wanting to know how to change your skoda octavia’s license plate bulb, we’ve created this article to help you do it by yourself and not have to go to your technician. Firstly, we will take a look at changing the license plate bulb from the outside, secondly, how to replace the license plate bulb without outside access, and thirdly, how to replace the rear license plate bulb of your skoda octavia.
How to change the license plate bulb on your skoda octavia through the outside
This method is the simplest of the two, in fact, for this one you will simply require to take away the protective covers of the bulbs. Unfortunately on some years or packages of car these covers do not open from the outside and if this is the situation we will spend a moment on in the second part of this document to describe the approach.
So let’s begin with replacing the number plate bulb by going through the outside of your skoda octavia. It doesn’t matter if it’s the front or the back of your motor vehicle the operation will be similar.
Here are a few simple guidelines to stick to to carry out this maintenance:
- With the engine turned off, disconnect the battery terminals from your car
- Position yourself in front of your license plate and use a flat screwdriver or knife to insert the flat part into the notch specified for this goal (usually on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your skoda octavia
- Use your screwdriver or knife to eject the bulb from its location, in the event you are afraid of breaking a thing, you can as well do it with your fingers.
- Finally, put the new license plate light bulb
- Last stage, before reassembling, reconnect your battery and check the light to confirm the successfulness of the procedure.
.
How to change the number plate bulb on your skoda octavia without outside access
Second part of our article, swap this license plate bulb on your skoda octavia without external access. Generally you will be able to access it, however some series (often at the rear does not allow this access).
How to change the front license plate bulb on my skoda octavia
To change the one on the front plate, nothing could be easier, you will have to put yourself under the motor vehicle (preferably positioned on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, usually kept by two soft plastic tabs by pressing on both simultaneously, then right after you have your license plate bulb block in hand, Remove the plastic that works as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be mindful not to put in too much force otherwise you will break the plastic cover), and you will only have to take away the burnt-out license plate bulb and replace it with the new , then test and reassemble the whole thing.
How to change the rear license plate bulb on my skoda octavia
Finally last possibility, you must change the bulb on the backplate of your skoda octavia, but you simply cannot open the cover from the outside of your motor vehicle. In such a case, here is the tactic to carry out this task:
- Disconnect the battery from your skoda octavia
- Locate the position of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, kept by clips, you will have to lever softly on all the frame of the trunk to remove it.
- Once established, before removing the bulb holders, disconnect the holders for less difficult access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Change the burnt-out license plate bulb on your skoda octavia, check it and reassemble it, watching the clips on the trunk liner
.
.
There you have it, you have found out the main solutions for replacing license plate bulbs on your car, bear in mind that on some models the methodology may be a bit different but you should be able to realize it following the explanation of this article content. If you can’t do it, don’t be reluctant to go to your garage it would be a shame to break a part of your skoda octavia. If you wish to change other bulbs like the position light bulbs on your skoda octavia or the low beam bulbs on skoda octavia, don’t be reluctant to read our content articles which demonstrate you the operation to follow.
To get more tips on the skoda octavia, take a look at the skoda octavia category.
