Whether it’s for your specific security, for roadworthiness testing or to avoid a fine, being certain your headlamp bulbs are all the time operational is extremely important. Indeed, bulbs are wearing parts that will obviously burn out over time and as a result need to be changed. You’re perhaps on this site because one of your parking lights is burnt out and you’re struggling with how to change your Renault Laguna 2’s license plate bulb, we’ve written and published this content to help you do it on your own and not have to go to your motor mechanic. Firstly, we will examine changing the license plate bulb from the outside, secondly, how to change the license plate bulb without outside access, and thirdly, how to change the rear license plate bulb of your Renault Laguna 2.
How to change the license plate bulb on your Renault Laguna 2 throughout the outside
This option is the easiest of the two, actually, for this one you will just have to take out the protective covers of the bulbs. Unfortunately on some years or packages of car these covers do not open from the outside and if this is the case we will dedicate some time on in the second section of this article content to explain the method.
So let’s start with replacing the number plate bulb by going through the outside of your Renault Laguna 2. Whether it’s the front or the back of your car the method will be identical.
Here are a few simple steps to follow to execute this maintenance:
- With the engine off, unplug the battery terminals from your car
- Face your license plate and use a flat screwdriver or knife to place the flat part into the notch supplied for this purpose (usually on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Renault Laguna 2
- Use your screwdriver or knife to remove the bulb from its placement, in the event that you are scared of damaging a thing, you can as well do it with your fingers.
- Finally, put the new license plate light bulb
- Last stage, before reassembling, reconnect your battery and test the light to confirm the success of the process.
.
How to replace the number plate bulb on your Renault Laguna 2 without outside access
Second section of our document, replace this license plate bulb on your Renault Laguna 2 without external access. In most cases you will be able to access it, however some series (often at the rear does not allow this access).
How to change the front license plate bulb on my Renault Laguna 2
To change the one on the front plate, nothing could be simpler, you will have to put yourself under the car (preferably placed on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, usually kept by two soft plastic tabs by pressing on both at once, then right after you have your license plate bulb block in hand, Take out the plastic that works as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be careful not to apply too much pressure otherwise you will break the plastic cover), and you will only have to take out the burnt-out license plate bulb and swap it with the new , then verify and reassemble the whole thing.
How to change the rear license plate bulb on my Renault Laguna 2
Finally last solution, you must change the bulb on the backplate of your Renault Laguna 2, but you cannot really open the cover from the outside of your car. In this instance, here is the process to conduct this task:
- Unplug the battery from your Renault Laguna 2
- Find the location of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, kept by clips, you will have to lever delicately on all the frame of the trunk to remove it.
- Once located, before removing the bulb holders, unplug the holders for less difficult access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Change the burnt-out license plate bulb on your Renault Laguna 2, test it and reassemble it, watching the clips on the trunk liner
.
.
There you have it, you have learned the main tactics for replacing license plate bulbs on your car, take note that on some models the technique may be a bit different but you should be able to do it following the explanation of this content. If you can’t do it, don’t be reluctant to go to your mechanic it would be a shame to break a part of your Renault Laguna 2. If you need to change other bulbs like the position light bulbs on your Renault Laguna 2 or the low beam bulbs on Renault Laguna 2, don’t be reluctant to read our content articles which demonstrate you the process to follow.
If perhaps you have any further questions about the Renault Laguna 2, do not hesitate to consult our Renault Laguna 2 category.
