Whether you feel you can’t see properly during the night, regardless whether you feel you’re lighting too low or too high, in all of these situations, there’s only one part of your automobile to blame – your low beams. Although this adjustment may seem simple thanks to the thumbwheel on your dashboard, a whole adjustment is much more technical than this ordinary manipulation, and in this content page, we will discover how to adjust the low beam lights of your Renault Laguna 2? For this, first we will discover why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Renault Laguna 2.
Why set the low beam lights of your Renault Laguna 2?
So let’s begin our content page with the benefit of adjusting the low beam lights of your Renault Laguna 2. For a lot of people these lights are sufficiently adjusted, and it seems that they light up enough at night. However this is not constantly the case and verifying this setting, either because the low beams of your Renault Laguna 2 are not illuminating well, or because you have the sense that they are too weak or too strong is a good idea .
Adjusting the low beam of your Renault Laguna 2 for safety is a good idea.
First of all, the adjusting of the dipped headlights of an Renault Laguna 2 must be done for a basic safety cause. Regardless whether it’s for you, or for the other users you encounter during your night trips. Indeed, if you don’t see enough, the real danger is to miss an obstacle on the route, or to anticipate a curve badly. On the other hand, if your lights are too strong, you risk dazzling the drivers in front of you, and thus putting yourself at risk. It is as a consequence imperative for others as well as for you to have an optimal setting of your parking lights.
Setting the low beam headlights of an Renault Laguna 2 for law justifications
Additionally to safety, there is a law that regulates the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at minimum , 30 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Renault Laguna 2?
We will now go forward to the section that concerns you the more in this content page, how to adjust the low beams of his Renault Laguna 2? This setting may appear a bit complicated, but if you stick to the guidelines you should be able to do it without too much problem.
Preparations to set the low beam of a Renault Laguna 2
First of all, you will need to prepare your automobile to adjust your low beam lights in good conditions, here are the preparations to do:
- Place your automobile on a area in front of a white wall for example, about 4 or 5 meters from the wall.
- Examine your tire pressure carefully.
- Examine that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unneeded weight from the automobile, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Renault Laguna 2
Once your automobile is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then back your automobile up to a distance of between 7 and 10 metres. For the rest of the task here are the steps to stick to:
- Open your bonnet, locate the screws for horizontal and vertical adjustment of the lights of your Renault Laguna 2 (they are in most cases marked, and those above must adjust the verticality and those on the side adjusts the horizontality of the adjustment).
- Use a cloth or anything else to hide the light on which you are not making the modification.
- Using the screws to make the horizontal modification, you should have the most strong part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once carried out, check that the low beam setting of your Renault Laguna 2 is consistent on the road, do not be reluctant to check that it has been driven, on occasion it may move.
.
If you want to adjust the fog lights on your Renault Laguna 2, please browse our content page on this subject.
If you wish more guides on the Renault Laguna 2, go to our Renault Laguna 2 category.
