It doesn’t matter if it’s for your personal security, for roadworthiness tests or to avoid a fine, ensuring your headlamp bulbs are constantly effective is very important. In reality, bulbs are wearing units that will inevitably burn out after some time and as a consequence need to be changed. You’re likely on this website because one of your parking lights is burnt out and you’re wanting to know how to change your Honda Insight’s license plate bulb, we’ve written this article content to help you do it without any help and not have to go to your auto technician. Firstly, we will look at changing the license plate bulb from the outside, secondly, how to replace the license plate bulb without outside access, and thirdly, how to replace the rear license plate bulb of your Honda Insight.
How to swap the license plate bulb on your Honda Insight through the outside
This tactic is the most simple of the two, actually, for this one you will only need to take out the protective covers of the bulbs. Sadly on some years or packages of car these covers do not open from the outside and if this is the situation we will spend some time on in the second part of this article to describe the approach.
So let’s begin with swapping the number plate bulb by going through the outside of your Honda Insight. It doesn’t matter if it’s the front or the back of your car the procedure will be identical.
Here are a few simple steps to stick to to execute this service:
- With the engine off, unplug the battery terminals from your car
- Face your license plate and use a flat screwdriver or knife to place the flat part into the notch provided for this intent (usually on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Honda Insight
- Use your screwdriver or knife to eject the bulb from its location, in the event you are afraid of destroying something, you can also do it with your fingers.
- Finally, put the new license plate light bulb
- Last step, before reassembling, reconnect your battery and verify the light to confirm the achievement of the procedure.
.
How to change the number plate bulb on your Honda Insight without outside access
Second part of our item, swap this license plate bulb on your Honda Insight without external access. Generally you will be able to access it, nevertheless some series (often at the rear does not allow this access).
How to swap the front license plate bulb on my Honda Insight
To swap the one on the front plate, nothing could be much easier, you will have to put yourself under the car (ideally put on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, usually kept by two soft plastic tabs by pressing on both at once, then now that you have your license plate bulb block in hand, Take off the plastic that acts as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be attentive not to exert too much force or you will break the plastic cover), and you will simply have to take out the burnt-out license plate bulb and swap it with the new , then verify and reassemble the whole thing.
How to swap the rear license plate bulb on my Honda Insight
Finally last option, you must swap the bulb on the backplate of your Honda Insight, but you cannot open the cover from the outside of your car. In such a case, here is the technique to do this task:
- Disconnect the battery from your Honda Insight
- Identify the position of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, kept by clips, you will have to lever gently on all the frame of the trunk to remove it.
- Once located, before removing the bulb holders, unplug the holders for less complicated access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Replace the burnt-out license plate bulb on your Honda Insight, verify it and reassemble it, paying attention to the clips on the trunk liner
.
.
There you have it, you have learned the main solutions for swapping license plate bulbs on your car, bear in mind that on some models the method may be a bit different but you should be able to accomplish it following the outline of this document. If you can’t do it, don’t be reluctant to go to your garage area it would be a shame to break a part of your Honda Insight. If you desire to change other bulbs like the position light bulbs on your Honda Insight or the low beam bulbs on Honda Insight, don’t be reluctant to browse our articles which explain you the procedure to follow.
If you want more guides on the Honda Insight, go to our Honda Insight category.
