Regardless whether it’s for your specific safety, for roadworthiness testing or to avoid a fine, ensuring that your headlamp bulbs are constantly working is fundamental. In reality, bulbs are wearing parts that will surely burn out after some time and as a result need to be swapped out. You’re most certainly on the website because one of your parking lights is burnt out and you’re questioning how to change your Ford Tourneo’s license plate bulb, we’ve created this document to help you do it on your own and not have to go to your technician. Firstly, we will look at changing the license plate bulb from the outside, secondly, how to change the license plate bulb without outside access, and thirdly, how to change the rear license plate bulb of your Ford Tourneo.
How to change the license plate bulb on your Ford Tourneo through the outside
This approach is the fastest of the two, in fact, for this one you will simply have to remove the protective covers of the bulbs. Unfortunately on some years or packages of car these covers do not open from the outside and if this is the situation we will spend a moment on in the second section of this article content to explain the method.
So let’s start with replacing the number plate bulb by going through the outside of your Ford Tourneo. Regardless whether it’s the front or the back of your vehicle the process will be similar.
Here are a few simple guidelines to stick to to execute this maintenance:
- With the engine turned off, disconnect the battery terminals from your car
- Face your license plate and use a flat screwdriver or knife to place the flat part into the notch supplied for this intent (almost always on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Ford Tourneo
- Use your screwdriver or knife to eject the bulb from its location, in the event that you are scared of destroying a thing, you can also do it with your fingers.
- Finally, position the new license plate light bulb
- Last stage, before reassembling, reconnect your battery and test the light to confirm the successfulness of the procedure.
.
How to replace the number plate bulb on your Ford Tourneo without outside access
Second section of our content page, swap this license plate bulb on your Ford Tourneo without external access. In most cases you will be able to access it, but some series (often at the rear does not allow this access).
How to change the front license plate bulb on my Ford Tourneo
To change the one on the front plate, nothing could be much easier, you will have to position yourself under the vehicle (ideally placed on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, almost always held by two soft plastic tabs by pressing on both simultaneously, then now that you have your license plate bulb block in hand, Take away the plastic that works as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (take extra care not to apply too much pressure or you will break the plastic cover), and you will simply have to remove the burnt-out license plate bulb and swap it with the new , then test and reassemble the whole thing.
How to change the rear license plate bulb on my Ford Tourneo
Finally last option, you must change the bulb on the backplate of your Ford Tourneo, but you simply cannot open the cover from the outside of your vehicle. In this case, here is the solution to do this task:
- Disconnect the battery from your Ford Tourneo
- Locate the position of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, held by clips, you will have to lever delicately on all the frame of the trunk to remove it.
- Once found, before removing the bulb holders, disconnect the holders for easier access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Replace the burnt-out license plate bulb on your Ford Tourneo, test it and reassemble it, watching the clips on the trunk liner
.
.
There you have it, you have found out the main techniques for replacing license plate bulbs on your car, take note that on some models the methodology may be a bit different but you should be able to do it following the outline of this document. If you can’t do it, don’t be reluctant to go to your mechanic it would be a shame to break a part of your Ford Tourneo. If you desire to change other bulbs like the position light bulbs on your Ford Tourneo or the low beam bulbs on Ford Tourneo, don’t be reluctant to browse our articles which describe you the process to follow.
To get more tips on the Ford Tourneo, take a look at the Ford Tourneo category.
