Whether you experience you can’t see as well at night, or you experience you’re lighting too low, or too high, in all these circumstances, there’s only one component of your car to take responsibility – your headlights, also called high beams. Nevertheless this adjustment may appear easy thanks to the thumbwheel on your dashboard, a complete adjustment is much more technical than this simple manipulation, and in this post, we are going to see how to adjust the headlights of your Ford Tourneo? To get this done, first we will see why you need to adjust your high beams, and secondly how to adjust the headlights of your Ford Tourneo.
Why adjust the headlights of your Ford Tourneo?
So let’s begin our content page with the interest of adjusting the headlights of your Ford Tourneo. For most people, our headlights are adjusted sufficiently, and they seem to light up enough during the night. However this is not constantly the case and examining this setting, either because the headlights on your Ford Tourneo are not bright enough, or because you have the sensation that they are too weak is a great idea .
Adjusting the high beams of your Ford Tourneo for safety
To begin with, the headlight adjustment of a Ford Tourneo must be achieved for a basic security motive. If it’s for you, or for the other users you come across during your night trips. Obviously, if you don’t see enough, the risk is to miss out an obstacle on your way, or to anticipate a curve badly. However, if your headlights are too powerful, regardless if you are expected to switch to low beam lights when you pass a car, the time needed to make this change will generally expose the driver in front of you to the headlight beam of your Ford Tourneo . It is consequently necessary for others as well as for you to have an ideal adjustment of your headlights.
Adjusting the headlights of a Ford Tourneo for legal reasons
In addition to security, there is a law that supervises the power, the adjustment of car headlights (articles R313-2 of the Highway Code), here is what it specifies: have between 2 and 4 headlights that illuminate at least 100 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that there is no maximum height for the adjustment of the headlights, but that the maximum width of the beam must be identical to that of the dipped headlights and that the maximum luminosity must be 225, 000 cd.
How to adjust the headlights of a Ford Tourneo?
We will now move on to the section that concerns you the most in this post, how to adjust the headlights of his Ford Tourneo? This adjustment may appear a bit complicated, but by following the instructions you should be able to complete it without too much trouble.
Preparations to adjust the headlights of a Ford Tourneo
To begin with, you’ll need to prepare your car to adjust your high beams in good conditions, here are the preparations to executed:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure cautiously.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all needless weight from the vehicle, just one person should be in the driver’s seat.
.
The headlight adjustment of his Ford Tourneo
Once your vehicle is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Check with a level that both parts of the cross are straight. Then back your car up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to stick to:
- Open your hood, locate the screws for horizontal and vertical modification of the headlights of your Ford Tourneo (they are in general marked, and those on top must adjust the verticality and the one on the side adjusts the horizontality of the adjustment).
- Use a cloth or another thing to hide the projector on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most intense component of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, verify that the headlights setting of your Ford Tourneo is logical, do not hesitate to verify it after you have driven it, sometimes it may move.
.
.
If you want to adjust the fog lights on your Ford Tourneo, please read our content page on this subject matter.
If perhaps you have any further questions about the Ford Tourneo, do not hesitate to consult our Ford Tourneo category.
