It doesn’t matter if for your personal safety, for roadworthiness testing or to avoid a fine, being sure your turn signal bulbs are always functioning is very important. In reality, bulbs are wearing parts that will undoubtedly burn out in the future and therefore need to be changed. You’re quite likely on this website because one of your front turn signals is burnt out and you’re questioning how to change the bulb of a front turn signal on your Hyundai Elantra, we’ve made this article content to help you do it all on your own and not have to go to your technician. In a first step, we will have a look at controling a burnt-out front turn signal bulb on your Hyundai Elantra and in a second step, how to change the front turn signal bulb on your car..

change-front-turn-bulb-hyundai-elantra

How to find out if the front turn signal bulb on your Hyundai Elantra is burnt out or needs to be swapped out?

When you drive your automobile you don’t constantly have the opportunity to examine all the safety components of your Hyundai Elantra. In reality, you are most likely in a rush and tend to get into your automobile, make your journey and put it down immediately without taking the time to do an regular check-up. It is as a consequence important to take the time to sometimes examine the condition of your headlights and turn signals. It’s quite possible that you have a front turn signal on your Hyundai Elantra, but that you didn’t notice it. Here are the two simple ways to check if a front turn signal is burnt out or if you need to swap it quickly:

  • When you stop, turn on the ignition on your car, then alternately turn on your left and right front turn signals and get out of the car to check that they are working.
  • By hearing to the sound of your blinkers. In reality, there is an audible sign on each car that warns you of a front turn indicator bulb burnt out on your Hyundai Elantra, you will notice that the time between each “click” is much closer, this denotes that you will have to replace the front turn signal bulb or before. It’s up to you to examine and check which one is burnt out by a visual check as on the first technique shown above.

You may have an additional bulb to swap, like the one of your low beam or your position lights, don’t hesitate to browse our content articles to help you to complete this replacing.

Changing the front turn signal bulb on your Hyundai Elantra

Now let’s go to the main step of this article content, how to change the front turn signal bulb of your Hyundai Elantra? You should be aware that this operation is very simple, you will require to access, from the inside of your bonnet, through the wheel arch, or simply by your bumper to your headlight unit, open it and change the burnt out front turn signal bulb of your Hyundai Elantra. If it is a bulb on your rear turn signal, see our special article content. On the other hand, here are the details of the steps to follow to be able to conduct this action correctly according to the solution you desire to choose.

Replace front turn signal bulb on your Hyundai Elantra through the bonnet:

  • Open your bonnet and clear access to your headlight pods.
  • Use a torx tip to open the headlight unit on your car
  • Unscrew the front turn signal bulb from your car by turning it a quarter turn counterclockwise
  • Replace the front flasher bulb of your Hyundai Elantra by the new one (make certain to examine if it’s an orange or transparent bulb).
  • Reassemble and test that the new front turn signal bulb is effective.
  • Replace the front turn signal bulb of your Hyundai Elantra through the wheel arch:

    This tactic is especially effective when you don’t have enough space in the hood to access the front turn signal on your car:

    • Lift your car, and remove the front wheel on the side you want to work on.
    • Take out your wheel arch with a torx bit.
    • Go to your headlamp block and swap the front turn signal bulb on your car following the same basic steps as on the part previously seen.

    Replace the front turn signal bulb of your Hyundai Elantra through the bumper:

    On some years or finishes, based on the options the only simple access you will have to swap the front turn signal bulb of your car will be to pass under your front bumper, there are only a few steps that change from the full technique, we will detail them now:

    • Put your Hyundai Elantra on a jack or a candle.
    • Remove the screws of the motor shoe of your car(plastic part under your motor) and your shock absorber. Beware with the plastic staples which can be breakable.
    • Take away your headlight block and swap the front turn indicator bulb of your Hyundai Elantra following the steps seen in the parts seen previously.
    • Put the whole thing back together again.

    If perhaps you have any additional questions about the Hyundai Elantra, do not hesitate to consult our Hyundai Elantra category.