Regardless whether you feel you can’t see as well at nighttime, whether you feel you’re lighting too low or too high, in all of these cases, there’s only one part of your vehicle to blame – your low beams. Despite the fact this correction may appear easy thanks to the thumbwheel on your dashboard, a whole correction is much more complex than this basic realignment, and in this article content, we will see how to adjust the low beam lights of your Volkswagen Rabbit? For this, first we will see why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Volkswagen Rabbit.
Why set the low beam lights of your Volkswagen Rabbit?
So let’s start our article content with the interest of adjusting the low beam lights of your Volkswagen Rabbit. For many people these lights are sufficiently adjusted, and it looks like that they light up enough at night. Sadly this is not always the case and checking out this setting, either because the low beams of your Volkswagen Rabbit are not lighting up well, or because you have the sense that they are too weak or too powerful is a wise decision .
Adjusting the low beam of your Volkswagen Rabbit for security is a wise decision.
To start, the adjusting of the dipped headlights of an Volkswagen Rabbit must be done for a simple security purpose. It doesn’t matter if it’s for you, or for the other users you come across during your night trips. Indeed, if you don’t see enough, the real danger is to fail to see an obstacle on the route, or to anticipate a curve badly. However, if your lights are too powerful, you risk dazzling the people in front of you, and thus putting yourself in danger. It is as a consequence imperative for others as well as for you to have an optimal setting of your parking lights.
Setting the low beam headlights of an Volkswagen Rabbit for legal motives
Additionally to security, there is a law that regulates the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that light up at minimum , 30 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Volkswagen Rabbit?
We will now move on to the section that concerns you the most in this article content, how to adjust the low beams of his Volkswagen Rabbit? This setting may seem a bit difficult, but if you stick to the recommendations you should be able to do it without too much problem.
Preparations to set the low beam of a Volkswagen Rabbit
To start, you will need to set up your vehicle to adjust your low beam lights in good conditions, here are the preparations to do:
- Place your vehicle on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure precisely.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unneeded weight from the vehicle, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Volkswagen Rabbit
Once your vehicle is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the operation here are the simple steps to stick to:
- Open your bonnet, locate the screws for horizontal and vertical adjustment of the lights of your Volkswagen Rabbit (they are commonly marked, and those above must adjust the verticality and those on the side adjusts the horizontality of the adjustment).
- Use a cloth or something else to hide the light on which you are not making the modification.
- Using the screws to make the horizontal modification, you should have the most powerful part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once accomplished, verify that the low beam setting of your Volkswagen Rabbit is consistent on the road, do not hesitate to verify that it has been driven, on occasion it may move.
.
If you want to adjust the fog lights on your Volkswagen Rabbit, please examine our article content on this subject.
If you need more guides on the Volkswagen Rabbit, go to our Volkswagen Rabbit category.
