Regardless whether you feel you can’t see properly at nighttime, whether you feel you’re lighting too low or too high, in all of these cases, there’s only one component of your car to blame – your low beams. Although this adjustment may seem easy to do thanks to the thumbwheel on your dashboard, a complete adjustment is much more complicated than this simple realignment, and in this article content, we will see how to adjust the low beam lights of your Ford Flex? For this, first of all we will see why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Ford Flex.
Why set the low beam lights of your Ford Flex?
So let’s commence our article content with the benefit of adjusting the low beam lights of your Ford Flex. For the majority of us these lights are well enough adjusted, and it looks like that they light up enough at night. Sadly this is not always the case and checking this setting, either because the low beams of your Ford Flex are not lighting up well, or because you have the feeling that they are too weak or too strong is a good plan .
Adjusting the low beam of your Ford Flex for safety is a good plan.
Firstly, the adjusting of the dipped headlights of an Ford Flex must be done for a simple safety reason. Whether it’s for you, or for the other users you encounter during your night journeys. In reality, if you don’t see enough, the risk is to miss an obstacle on the route, or to predict a curve badly. However, if your lights are too strong, you risk dazzling the car owners in front of you, and thus putting yourself in danger. It is subsequently essential for others as well as for you to have an optimal setting of your parking lights.
Setting the low beam headlights of an Ford Flex for legal motives
Moreover to safety, there is a law that supervises the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at minimum , 30 meters. Another law supervises their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Ford Flex?
We will now go forward to the part that interests you the most in this article content, how to adjust the low beams of his Ford Flex? This setting may seem to be a bit difficult, but if you stick to the recommendations you should be able to do it without too much problem.
Preparations to set the low beam of a Ford Flex
Firstly, you will need to set up your car to adjust your low beam lights in good conditions, here are the preparations to put in place:
- Place your car on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Examine your tire pressure precisely.
- Examine that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unnecessary weight from the car, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Ford Flex
Once your car is in position, you will switch on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then move back your car up to a distance of between 7 and 10 metres. For the rest of the procedure here are the simple steps to stick to:
- Open your bonnet, locate the screws for horizontal and vertical adjustment of the lights of your Ford Flex (they are in general marked, and those above must adjust the verticality and those on the side handles the horizontality of the adjustment).
- Use a cloth or some thing else to hide the light on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once completed, check that the low beam setting of your Ford Flex is consistent on the road, do not hesitate to check that it has been driven, sometimes it may move.
.
If you want to adjust the fog lights on your Ford Flex, please go through our article content on this subject.
To discover more tips on the Ford Flex, take a look at the Ford Flex category.
