Keeping an eye on your vehicle is important in these days, indeed, if you do not do the minimum service of it, or if you do not take into account alerts of abnormality, you strongly risk to observe your car getting in bad conditions. This is exactly the theme we are going to focus on on this webpage, one of the symptoms that most disturbs drivers is the ABS warning light on Volkswagen Rabbit. In an attempt to help you review this warning light, we will first take a look at what this ABS warning light corresponds to, then in a second what to do if the ABS light is on Volkswagen Rabbit?.
What does the ABS light on Volkswagen Rabbit indicate?
We will commence our article with the meaning of an ABS warning light on Volkswagen Rabbit, to do this, in first, we will see what an ABS is, and soon after, why the ABS light on your car lights up.
What is the ABS on Volkswagen Rabbit?
To begin with, it is fundamental to demonstrate to you what the ABS of your Volkswagen Rabbit is intended for so that you can understand the rest of this article content. The ABS (Anti-lock Braking System) is a device that prevents the wheels of your car from locking during braking. The objective of this system is to lower the braking distance of a car by preventing the wheels from locking, sliding on the road and you losing control of your car. The ABS system of your Volkswagen Rabbit is composed of different parts, here they are:
- Speed sensors on each wheel, which will analyze if one of the wheels locks up.
- A hydraulic system and valves that will control the pressure of the pads on the discs to control the braking power of the car
- A computer that is the control center of your entire ABS system as well as the ABS light of your Volkswagen Rabbit
.
In fact, you can simply come to feel how your car’s ABS works. If you have to steer, you will find that your car will brake by pawing, this is exactly the behaviour that ABS permits, it will optimise braking to the maximum by relating the phases of pressure on the brake discs and the phases of discharge to prevent the wheels from locking up.
Meaning of an ABS light on Volkswagen Rabbit
Now we proceed to the part that you are probably more curious about, meaning of an ABS warning light on a Volkswagen Rabbit? First of all, it is an orange light, so if it is on it denotes that your ABS system is faulty. You should be knowledgeable that when the ABS warning light is on, the ABS will be put into safety mode, so you should change your driving and not take any risks. Here are the different problems that the ABS warning light on your Volkswagen Rabbit can indicate:
- It could be a simple short circuit, a broken wiring harness, a faulty relay or fuse. Use a pressure gauge to examine it.
- A malfunctioning ABS sensor: A failure of one of them motives the ABS light on your Volkswagen Rabbit to come on
- The ABS hydraulic block of your Volkswagen Rabbit: If it is faulty it is possible that the indicator light will come on and you will no longer be able to use your ABS.
- The ABS computer: If the computer has a trouble, being the center of all decisions made to manage your ABS, the light will inevitably come on.
What if the ABS light activate on my Volkswagen Rabbit?
We will now proceed to the part where we will try to give you some solutions to shut off this light, and thus answer the following question, what to do if the ABS light is on on my Volkswagen Rabbit?. The solutions will might depend on the failure you are enduring. First of all, pass your Volkswagen Rabbit to the diagnostic tool, if you don’t know how to read a fault code on Volkswagen Rabbit, don’t be reluctant to read our article content which explains the steps to take. Once you have discovered the source of your issue, here are the steps to take to resolve it and turn off the ABS light on your Volkswagen Rabbit:
- Issue of the ECU or the hydraulic block: It can only be adjusted, and in this situation, you will have to go through a professional, but if it’s dead, it could cost you around 1000€ to change the ECU and 1500 to 2000€ if you have to change both of them.
- Electrical issue: Once you’ve noticed an electrical issue with your manometer, if it’s only a fuse or a relay, count around 10€ maximum, in any other case you’ll have to repair the wiring harness.
- A faulty sensor: Occasionally a simple cleaning of the sensors will be enough to remedy the issue, in any other case changing a sensor can cost up to a few hundred euros.
To get more tips on the Volkswagen Rabbit, take a look at the Volkswagen Rabbit category.