Whether you feel you can’t see properly after dark, whether you feel you’re lighting too low or too high, in all of these circumstances, there’s only one component of your automobile to blame – your low beams. Although this correction may seem easy to do thanks to the thumbwheel on your dashboard, a full correction is much more complicated than this common realignment, and in this document, we will see how to adjust the low beam lights of your Kia Rio? For this, first we will see why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Kia Rio.
Why adjust the low beam lights of your Kia Rio?
So let’s commence our document with the benefit of adjusting the low beam lights of your Kia Rio. For many of us these lights are sufficiently adjusted, and it looks like that they light up enough at night. However this is not constantly the case and checking this setting, either because the low beams of your Kia Rio are not lighting up well, or because you have the feeling that they are too low or too strong is a good option .
Adjusting the low beam of your Kia Rio for safety is a good option.
Firstly, the adjusting of the dipped headlights of an Kia Rio must be done for a basic safety purpose. Regardless whether it’s for you, or for the other drivers you come across during your night trips. In reality, if you don’t see enough, the real danger is to fail to see an obstacle on the road, or to anticipate a curve badly. Alternatively, if your lights are too strong, you risk dazzling the drivers in front of you, and thus putting yourself in danger. It is subsequently important for others as well as for you to have an ideal setting of your parking lights.
Setting the low beam headlights of an Kia Rio for law reasons
Additionally to safety, there is a law that controls the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that light up at least 30 meters. Another law controls their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Kia Rio?
We will now go forward to the part that concerns you the more in this document, how to adjust the low beams of his Kia Rio? This setting may seem to be a bit complex, but if you follow the instructions you should be able to do it without too much difficulty.
Preparations to set the low beam of a Kia Rio
Firstly, you will need to set up your automobile to adjust your low beam lights in good conditions, here are the preparations to put in place:
- Place your automobile on a floor in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure rigorously.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unneeded weight from the automobile, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Kia Rio
Once your automobile is into position, you will switch on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then step back your automobile up to a distance of between 7 and 10 metres. For the rest of the task here are the steps to follow:
- Open your bonnet, locate the screws for horizontal and vertical adjustment of the lights of your Kia Rio (they are in most cases marked, and those above must adjust the verticality and those on the side handles the horizontality of the adjustment).
- Use a cloth or some thing else to hide the light on which you are not making the adjustment.
- Using the screws to make the horizontal adjustment, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once carried out, examine that the low beam setting of your Kia Rio is consistent on the road, do not hesitate to examine that it has been driven, sometimes it may move.
.
If you want to adjust the fog lights on your Kia Rio, please examine our document on this subject.
In the event that you have any additional questions about the Kia Rio, do not hesitate to consult our Kia Rio category.
