It doesn’t matter if you feel you can’t see as well after dark, regardless whether you feel you’re lighting too low or too high, in all of these cases, there’s only one component of your vehicle to blame – your low beams. Although this correction may appear easy to do thanks to the thumbwheel on your dashboard, a complete correction is much more complex than this simple modification, and in this article, we will see how to adjust the low beam lights of your Suzuki Jimny? For this, first of all we will see why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Suzuki Jimny.
Why set the low beam lights of your Suzuki Jimny?
So let’s start our article with the interest of adjusting the low beam lights of your Suzuki Jimny. For a lot of people these lights are sufficiently adjusted, and it seems that they light up enough at night. Unfortunately this is not constantly the case and examining this setting, either because the low beams of your Suzuki Jimny are not lighting up well, or because you have the sense that they are too low or too powerful is a good option .
Adjusting the low beam of your Suzuki Jimny for safety is a good option.
First of all, the adjusting of the dipped headlights of an Suzuki Jimny must be done for a ordinary safety cause. Whether it’s for you, or for the other users you come across during your night journeys. In fact, if you don’t see enough, the risk is to miss an obstacle on the route, or to predict a curve badly. On the contrary, if your lights are too powerful, you risk dazzling the drivers in front of you, and thus putting yourself in danger. It is as a consequence important for others as well as for you to have an ideal setting of your parking lights.
Setting the low beam headlights of an Suzuki Jimny for legal reasons
Furthermore to safety, there is a law that controls the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that light up at minimum , 30 meters. Another regulation controls their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Suzuki Jimny?
We will now move on to the part that concerns you the more in this article, how to adjust the low beams of his Suzuki Jimny? This setting may seem a bit complicated, but if you stick to the recommendations you should be able to do it without too much difficulty.
Preparations to set the low beam of a Suzuki Jimny
To start, you will need to set up your vehicle to adjust your low beam lights in good conditions, here are the preparations to apply:
- Place your vehicle on a area in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure precisely.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unneeded weight from the vehicle, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Suzuki Jimny
Once your vehicle is set up, you will switch on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then back your vehicle up to a distance of between 7 and 10 metres. For the rest of the task here are the simple steps to stick to:
- Open your bonnet, situate the screws for horizontal and vertical adjustment of the lights of your Suzuki Jimny (they are in general marked, and those above must adjust the verticality and those on the side controls the horizontality of the adjustment).
- Use a cloth or some thing else to hide the light on which you are not making the adjustment.
- Using the screws to make the horizontal adjustment, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once carried out, examine that the low beam setting of your Suzuki Jimny is consistent on the road, do not be reluctant to examine that it has been driven, in some cases it may move.
.
If you want to adjust the fog lights on your Suzuki Jimny, please examine our article on this subject.
If you want more tutorials on the Suzuki Jimny, go to our Suzuki Jimny category.
