Regardless you feel you can’t see properly at night, whether you feel you’re lighting too low or too high, in all of these occasions, there’s only one part of your vehicle to blame – your low beams. Although this adjustment may look easy to do thanks to the thumbwheel on your dashboard, a full adjustment is much more complex than this ordinary manipulation, and in this article content, we will see how to adjust the low beam lights of your Renault Trafic 3? For this, first of all we will see why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Renault Trafic 3.
Why adjust the low beam lights of your Renault Trafic 3?
So let’s start our article content with the point of adjusting the low beam lights of your Renault Trafic 3. For most people these lights are well enough adjusted, and it seems that they light up enough at night. Sadly this is not necessarily the case and checking out this setting, either because the low beams of your Renault Trafic 3 are not illuminating well, or because you have the feeling that they are too low or too strong is a good option .
Adjusting the low beam of your Renault Trafic 3 for security is a good option.
First of all, the adjusting of the dipped headlights of an Renault Trafic 3 must be done for a basic security reason. Regardless whether it’s for you, or for the other users you come across during your night journeys. In fact, if you don’t see enough, the real danger is to miss an obstacle on the route, or to anticipate a curve badly. Alternatively, if your lights are too strong, you risk dazzling the people in front of you, and thus putting yourself at risk. It is subsequently important for others as well as for you to have an optimal setting of your parking lights.
Setting the low beam headlights of an Renault Trafic 3 for legal motives
In addition to security, there is a law that controls the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that light up at minimum , 30 meters. Another law controls their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Renault Trafic 3?
We will now go forward to the section that concerns you the most in this article content, how to adjust the low beams of his Renault Trafic 3? This setting may appear a bit complex, but if you stick to the recommendations you should be able to do it without too much problem.
Preparations to set the low beam of a Renault Trafic 3
To start, you will need to prepare your vehicle to adjust your low beam lights in good conditions, here are the preparations to put in place:
- Place your vehicle on a floor in front of a white wall for example, about 4 or 5 meters from the wall.
- Examine your tire pressure cautiously.
- Examine that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unneeded weight from the vehicle, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Renault Trafic 3
Once your vehicle is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then step back your vehicle up to a distance of between 7 and 10 metres. For the rest of the procedure here are the simple steps to stick to:
- Open your bonnet, locate the screws for horizontal and vertical adjustment of the lights of your Renault Trafic 3 (they are usually marked, and those above must adjust the verticality and those on the side adjusts the horizontality of the adjustment).
- Use a cloth or something else to hide the light on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most strong part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, examine that the low beam setting of your Renault Trafic 3 is consistent on the road, do not be reluctant to examine that it has been driven, sometimes it may move.
.
If you want to adjust the fog lights on your Renault Trafic 3, please go through our article content on this subject.
To get more tips on the Renault Trafic 3, take a look at the Renault Trafic 3 category.
