Regardless whether you feel you can’t see good enough through the night, regardless whether you feel you’re lighting too low or too high, in all of these circumstances, there’s only one part of your vehicle to blame – your low beams. Despite the fact this correction may seem simple thanks to the thumbwheel on your dashboard, a complete correction is much more technical than this basic realignment, and in this article, we will see how to adjust the low beam lights of your Toyota Rav 4? For this, first we will see why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Toyota Rav 4.
Why adjust the low beam lights of your Toyota Rav 4?
So let’s commence our article with the advantage of adjusting the low beam lights of your Toyota Rav 4. For many of us these lights are sufficiently adjusted, and it seems that they light up enough at night. Unfortunately this is not automatically the case and looking at this setting, either because the low beams of your Toyota Rav 4 are not illuminating well, or because you have the feeling that they are too weak or too powerful is a good option .
Adjusting the low beam of your Toyota Rav 4 for security is a good option.
Firstly, the adjusting of the dipped headlights of an Toyota Rav 4 must be done for a simple security reason. It doesn’t matter if it’s for you, or for the other drivers you come across during your night trips. Indeed, if you don’t see enough, the risk is to fail to see an obstacle on the route, or to predict a curve badly. On the contrary, if your lights are too powerful, you risk dazzling the people in front of you, and thus putting yourself at risk. It is therefore fundamental for others as well as for you to have an ideal setting of your parking lights.
Setting the low beam headlights of an Toyota Rav 4 for law reasons
In addition to security, there is a law that regulates the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at minimum , 30 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Toyota Rav 4?
We will now move on to the section that interests you the more in this article, how to adjust the low beams of his Toyota Rav 4? This setting may appear to be a bit complex, but if you stick to the instructions you should be able to do it without too much problem.
Preparations to set the low beam of a Toyota Rav 4
Firstly, you will need to set up your vehicle to adjust your low beam lights in good conditions, here are the preparations to do:
- Place your vehicle on a area in front of a white wall for example, about 4 or 5 meters from the wall.
- Examine your tire pressure rigorously.
- Examine that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all needless weight from the vehicle, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Toyota Rav 4
Once your vehicle is into position, you will switch on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then step back your vehicle up to a distance of between 7 and 10 metres. For the rest of the process here are the basic steps to stick to:
- Open your bonnet, identify the screws for horizontal and vertical adjustment of the lights of your Toyota Rav 4 (they are usually marked, and those above must adjust the verticality and those on the side adjusts the horizontality of the adjustment).
- Use a cloth or anything else to hide the light on which you are not making the manipulation.
- Using the screws to make the horizontal manipulation, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, examine that the low beam setting of your Toyota Rav 4 is consistent on the road, do not be reluctant to examine that it has been driven, sometimes it may move.
.
If you want to adjust the fog lights on your Toyota Rav 4, please read our article on this subject.
If you wish more guides on the Toyota Rav 4, go to our Toyota Rav 4 category.
