It doesn’t matter if you feel you can’t see as well after dark, whether you feel you’re lighting too low or too high, in all of these cases, there’s only one component of your car to blame – your low beams. Although this correction may appear easy to do thanks to the thumbwheel on your dashboard, a complete correction is much more complex than this ordinary realignment, and in this article content, we will see how to adjust the low beam lights of your Renault Kangoo 2? For this, first we will see why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Renault Kangoo 2.
Why set the low beam lights of your Renault Kangoo 2?
So let’s begin our article content with the point of adjusting the low beam lights of your Renault Kangoo 2. For many of us these lights are well enough adjusted, and it looks like that they light up enough at night. Unfortunately this is not constantly the case and examining this setting, either because the low beams of your Renault Kangoo 2 are not illuminating well, or because you have the feeling that they are too weak or too powerful is a good plan .
Adjusting the low beam of your Renault Kangoo 2 for safety is a good plan.
Firstly, the adjusting of the dipped headlights of an Renault Kangoo 2 must be done for a ordinary safety purpose. Regardless it’s for you, or for the other users you encounter during your night journeys. In reality, if you don’t see enough, the risk is to miss an obstacle on the route, or to predict a curve badly. On the contrary, if your lights are too powerful, you risk dazzling the people in front of you, and thus putting yourself at risk. It is as a consequence essential for others as well as for you to have an optimal setting of your parking lights.
Setting the low beam headlights of an Renault Kangoo 2 for law reasons
In addition to safety, there is a law that controls the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at least 30 meters. Another law controls their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Renault Kangoo 2?
We will now move on to the section that interests you the more in this article content, how to adjust the low beams of his Renault Kangoo 2? This setting may seem to be a bit difficult, but if you follow the recommendations you should be able to do it without too much difficulty.
Preparations to set the low beam of a Renault Kangoo 2
To start, you will need to set up your car to adjust your low beam lights in good conditions, here are the preparations to do:
- Place your car on a area in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure rigorously.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unnecessary weight from the car, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Renault Kangoo 2
Once your car is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then move back your car up to a distance of between 7 and 10 metres. For the rest of the process here are the simple steps to follow:
- Open your bonnet, locate the screws for horizontal and vertical adjustment of the lights of your Renault Kangoo 2 (they are commonly marked, and those above must adjust the verticality and those on the side manages the horizontality of the adjustment).
- Use a cloth or something else to hide the light on which you are not making the adjustment.
- Using the screws to make the horizontal adjustment, you should have the most powerful part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once finished, verify that the low beam setting of your Renault Kangoo 2 is consistent on the road, do not be reluctant to verify that it has been driven, in some cases it may move.
.
If you want to adjust the fog lights on your Renault Kangoo 2, please examine our article content on this subject.
If you wish more tutorials on the Renault Kangoo 2, go to our Renault Kangoo 2 category.
