Regardless you feel you can’t see properly at night, whether you feel you’re lighting too low or too high, in all of these circumstances, there’s only one part of your automobile to blame – your low beams. Despite the fact this correction may seem simple thanks to the thumbwheel on your dashboard, a whole correction is much more complicated than this simple realignment, and in this article content, we will see how to adjust the low beam lights of your Peugeot Bipper? For this, first we will see why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Peugeot Bipper.
Why set the low beam lights of your Peugeot Bipper?
So let’s commence our article content with the interest of adjusting the low beam lights of your Peugeot Bipper. For many of us these lights are well enough adjusted, and it seems that they light up enough at night. Unfortunately this is not always the case and looking at this setting, either because the low beams of your Peugeot Bipper are not illuminating well, or because you have the sense that they are too low or too powerful is a good plan .
Adjusting the low beam of your Peugeot Bipper for security is a good plan.
Firstly, the adjusting of the dipped headlights of an Peugeot Bipper must be done for a basic security purpose. Regardless whether it’s for you, or for the other users you encounter during your night trips. Indeed, if you don’t see enough, the real danger is to miss an obstacle on the road, or to anticipate a curve badly. On the flip side, if your lights are too powerful, you risk dazzling the drivers in front of you, and thus putting yourself in danger. It is consequently imperative for others as well as for you to have an optimal setting of your parking lights.
Setting the low beam headlights of an Peugeot Bipper for law motives
Moreover to security, there is a law that supervises the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that light up at least 30 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Peugeot Bipper?
We will now go forward to the section that concerns you the most in this article content, how to adjust the low beams of his Peugeot Bipper? This setting may appear a bit difficult, but if you follow the instructions you should be able to do it without too much difficulty.
Preparations to set the low beam of a Peugeot Bipper
First of all, you will need to prepare your automobile to adjust your low beam lights in good conditions, here are the preparations to apply:
- Place your automobile on a surface in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure rigorously.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unnecessary weight from the automobile, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Peugeot Bipper
Once your automobile is into position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then back your automobile up to a distance of between 7 and 10 metres. For the rest of the process here are the steps to follow:
- Open your bonnet, situate the screws for horizontal and vertical adjustment of the lights of your Peugeot Bipper (they are almost always marked, and those above must adjust the verticality and those on the side controls the horizontality of the adjustment).
- Use a cloth or anything else to hide the light on which you are not making the correction.
- Using the screws to make the horizontal correction, you should have the most strong part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once completed, examine that the low beam setting of your Peugeot Bipper is consistent on the road, do not hesitate to examine that it has been driven, in some cases it may move.
.
If you want to adjust the fog lights on your Peugeot Bipper, please examine our article content on this subject.
If you wish more guides on the Peugeot Bipper, go to our Peugeot Bipper category.
