Regardless whether you feel you can’t see properly through the night, regardless whether you feel you’re lighting too low or too high, in all of these occasions, there’s only one part of your motor vehicle to blame – your low beams. Even though this correction may look easy to do thanks to the thumbwheel on your dashboard, a complete correction is much more complex than this basic modification, and in this document, we will discover how to adjust the low beam lights of your Renault Koleos? For this, first of all we will discover why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Renault Koleos.
Why adjust the low beam lights of your Renault Koleos?
So let’s start our document with the interest of adjusting the low beam lights of your Renault Koleos. For most people these lights are good enough adjusted, and it seems that they light up enough at night. However this is not necessarily the case and verifying this setting, either because the low beams of your Renault Koleos are not illuminating well, or because you have the feeling that they are too weak or too strong is a wise decision .
Adjusting the low beam of your Renault Koleos for security is a wise decision.
To begin, the adjusting of the dipped headlights of an Renault Koleos must be done for a basic security reason. It doesn’t matter if it’s for you, or for the other users you encounter during your night journeys. In reality, if you don’t see enough, the risk is to fail to see an obstacle on the road, or to anticipate a curve badly. However, if your lights are too strong, you risk dazzling the drivers in front of you, and thus putting yourself at risk. It is subsequently crucial for others as well as for you to have an ideal setting of your parking lights.
Setting the low beam headlights of an Renault Koleos for law motives
Additionally to security, there is a law that regulates the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that light up at minimum , 30 meters. Another law regulates their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Renault Koleos?
We will now move on to the part that interests you the most in this document, how to adjust the low beams of his Renault Koleos? This setting may appear to be a bit complicated, but if you stick to the instructions you should be able to do it without too much problem.
Preparations to set the low beam of a Renault Koleos
First of all, you will need to prepare your motor vehicle to adjust your low beam lights in good conditions, here are the preparations to do:
- Place your motor vehicle on a floor in front of a white wall for example, about 4 or 5 meters from the wall.
- Examine your tire pressure cautiously.
- Examine that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unnecessary weight from the motor vehicle, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Renault Koleos
Once your motor vehicle is set up, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then back your motor vehicle up to a distance of between 7 and 10 metres. For the rest of the operation here are the simple steps to stick to:
- Open your bonnet, identify the screws for horizontal and vertical adjustment of the lights of your Renault Koleos (they are commonly marked, and those above must adjust the verticality and those on the side manages the horizontality of the adjustment).
- Use a cloth or anything else to hide the light on which you are not making the modification.
- Using the screws to make the horizontal modification, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical modification, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once accomplished, verify that the low beam setting of your Renault Koleos is consistent on the road, do not be reluctant to verify that it has been driven, in some cases it may move.
.
If you want to adjust the fog lights on your Renault Koleos, please read our document on this subject.
To discover more tips on the Renault Koleos, take a look at the Renault Koleos category.
