Whether you feel you can’t see properly after dark, regardless you feel you’re lighting too low or too high, in all of these occasions, there’s only one component of your motor vehicle to blame – your low beams. Despite the fact this correction may look easy to do thanks to the thumbwheel on your dashboard, a full correction is much more technical than this basic manipulation, and in this article, we will discover how to adjust the low beam lights of your Mercedes Benz CLS Class? For this, first we will discover why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Mercedes Benz CLS Class.
Why adjust the low beam lights of your Mercedes Benz CLS Class?
So let’s begin our article with the benefit of adjusting the low beam lights of your Mercedes Benz CLS Class. For the majority of us these lights are sufficiently adjusted, and it seems that they light up enough at night. Sadly this is not always the case and checking out this setting, either because the low beams of your Mercedes Benz CLS Class are not lighting up well, or because you have the sense that they are too low or too powerful is a good plan .
Adjusting the low beam of your Mercedes Benz CLS Class for safety is a good plan.
Firstly, the adjusting of the dipped headlights of an Mercedes Benz CLS Class must be done for a elementary safety purpose. Whether it’s for you, or for the other drivers you encounter during your night trips. In reality, if you don’t see enough, the risk is to fail to see an obstacle on the road, or to predict a curve badly. However, if your lights are too powerful, you risk dazzling the drivers in front of you, and thus putting yourself at risk. It is consequently essential for others as well as for you to have an ideal setting of your parking lights.
Setting the low beam headlights of an Mercedes Benz CLS Class for legal motives
Furthermore to safety, there is a law that regulates the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at least 30 meters. Another legislation regulates their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the ground, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Mercedes Benz CLS Class?
We will now go forward to the part that concerns you the most in this article, how to adjust the low beams of his Mercedes Benz CLS Class? This setting may seem a bit complex, but if you stick to the recommendations you should be able to do it without too much difficulty.
Preparations to set the low beam of a Mercedes Benz CLS Class
First of all, you will need to set up your motor vehicle to adjust your low beam lights in good conditions, here are the preparations to do:
- Place your motor vehicle on a area in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure cautiously.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all needless weight from the motor vehicle, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Mercedes Benz CLS Class
Once your motor vehicle is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then back your motor vehicle up to a distance of between 7 and 10 metres. For the rest of the task here are the steps to stick to:
- Open your bonnet, identify the screws for horizontal and vertical adjustment of the lights of your Mercedes Benz CLS Class (they are commonly marked, and those above must adjust the verticality and those on the side controls the horizontality of the adjustment).
- Use a cloth or anything else to hide the light on which you are not making the modification.
- Using the screws to make the horizontal modification, you should have the most strong part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical correction, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once done, check that the low beam setting of your Mercedes Benz CLS Class is consistent on the road, do not hesitate to check that it has been driven, sometimes it may move.
.
If you want to adjust the fog lights on your Mercedes Benz CLS Class, please examine our article on this subject.
If you need more tutorials on the Mercedes Benz CLS Class, go to our Mercedes Benz CLS Class category.
