It doesn’t matter if you feel you can’t see as well after dark, regardless you feel you’re lighting too low or too high, in all of these cases, there’s only one part of your motor vehicle to blame – your low beams. Despite the fact this adjustment may appear easy to do thanks to the thumbwheel on your dashboard, a complete adjustment is much more complex than this ordinary realignment, and in this article content, we will discover how to adjust the low beam lights of your Chrysler Pacifica? For this, first of all we will discover why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Chrysler Pacifica.

set-low-beam-headlights-chrysler-pacifica

Why set the low beam lights of your Chrysler Pacifica?

So let’s commence our article content with the benefit of adjusting the low beam lights of your Chrysler Pacifica. For many of us these lights are well enough adjusted, and it looks like that they light up enough at night. However this is not always the case and checking this setting, either because the low beams of your Chrysler Pacifica are not illuminating well, or because you have the sense that they are too weak or too powerful is a good option .

Adjusting the low beam of your Chrysler Pacifica for safety is a good option.

Firstly, the adjusting of the dipped headlights of an Chrysler Pacifica must be done for a ordinary safety cause. Regardless it’s for you, or for the other users you come across during your night trips. In reality, if you don’t see enough, the risk is to miss an obstacle on the road, or to anticipate a curve badly. On the contrary, if your lights are too powerful, you risk dazzling the car owners in front of you, and thus putting yourself at risk. It is as a consequence necessary for others as well as for you to have an optimal setting of your parking lights.

Setting the low beam headlights of an Chrysler Pacifica for legal reasons

In addition to safety, there is a law that supervises the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at minimum , 30 meters. Another legislation supervises their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.

How to adjust the low-beam headlamps of a Chrysler Pacifica?

We will now move on to the part that interests you the most in this article content, how to adjust the low beams of his Chrysler Pacifica? This setting may seem a bit complicated, but if you stick to the instructions you should be able to do it without too much problem.

Preparations to set the low beam of a Chrysler Pacifica

To start, you will need to prepare your motor vehicle to adjust your low beam lights in good conditions, here are the preparations to apply:

  • Place your motor vehicle on a area in front of a white wall for example, about 4 or 5 meters from the wall.
  • Examine your tire pressure precisely.
  • Examine that the height adjustment knob for the lights is set to 0
  • .

  • Try doing that with half a full tank.
  • Remove all unneeded weight from the motor vehicle, only one person should be in the driver’s seat.

The setting of the low beam headlights of his Chrysler Pacifica

Once your motor vehicle is set up, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then back your motor vehicle up to a distance of between 7 and 10 metres. For the rest of the task here are the steps to stick to:

  • Open your bonnet, locate the screws for horizontal and vertical adjustment of the lights of your Chrysler Pacifica (they are commonly marked, and those above must adjust the verticality and those on the side handles the horizontality of the adjustment).
  • Use a cloth or some thing else to hide the light on which you are not making the modification.
  • Using the screws to make the horizontal modification, you should have the most intense part of the beam which should be a little to the right of the vertical line marked on the wall
  • .

  • With regard to vertical adjustment, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
  • Once accomplished, examine that the low beam setting of your Chrysler Pacifica is consistent on the road, do not be reluctant to examine that it has been driven, in some cases it may move.

If you want to adjust the fog lights on your Chrysler Pacifica, please browse our article content on this subject.

If perhaps you have any further questions about the Chrysler Pacifica, do not hesitate to consult our Chrysler Pacifica category.