Whether it’s for your specific security, for roadworthiness tests or to avoid a fine, ensuring your headlamp bulbs are always functioning is fundamental. Indeed, bulbs are wearing units that will predictably burn out after a while and consequently need to be swapped out. You’re perhaps in this article because one of your parking lights is burnt out and you’re struggling with how to change your Mercedes Benz CLS Class’s license plate bulb, we’ve written and published this content to help you do it all on your own and not have to go to your technician. Firstly, we will look at changing the license plate bulb from the outside, secondly, how to replace the license plate bulb without outside access, and thirdly, how to replace the rear license plate bulb of your Mercedes Benz CLS Class.
How to swap the license plate bulb on your Mercedes Benz CLS Class throughout the outside
This process is the most simple of the two, in truth, for this one you will only require to take out the protective covers of the bulbs. Regrettably on some years or packages of car these covers do not open from the outside and if this is the situation we will dedicate some time on in the second part of this article content to clarify the approach.
So let’s begin with changing the number plate bulb by going through the outside of your Mercedes Benz CLS Class. Whether it’s the front or the back of your automobile the technique will be similar.
Here are a few simple steps to stick to to perform this service:
- With the engine off, disconnect the battery terminals from your car
- Face your license plate and use a flat screwdriver or knife to insert the flat part into the notch provided for this goal (in most cases on the transparent cover) and lever on the plastic window to open the license plate bulb slot of your Mercedes Benz CLS Class
- Use your screwdriver or knife to eject the bulb from its place, in the event that you are scared of damaging a thing, you can as well do it with your fingers.
- Finally, put the new license plate light bulb
- Last step, before reassembling, reconnect your battery and test the light to validate the achievement of the operation.
.
How to change the number plate bulb on your Mercedes Benz CLS Class without outside access
Second part of our document, swap this license plate bulb on your Mercedes Benz CLS Class without external access. In most cases you will be able to access it, nevertheless some series (often at the rear does not allow this access).
How to swap the front license plate bulb on my Mercedes Benz CLS Class
To swap the one on the front plate, nothing could be much easier, you will have to put yourself under the automobile (preferably placed on candles to give you some space), and, going through the rear of the bumper, you will have to unclip the license plate bulb block, in most cases kept by two soft plastic tabs by pressing on both simultaneously, then now that you have your license plate bulb block in hand, Take away the plastic that acts as a seal, then with a thin screwdriver, on one side you will find a small notch, use a lever to open the plastic cover (be cautious not to put in too much force or you will break the plastic cover), and you will simply have to take out the burnt-out license plate bulb and change it with the new , then test and reassemble the whole thing.
How to swap the rear license plate bulb on my Mercedes Benz CLS Class
Finally last possibility, you must swap the bulb on the backplate of your Mercedes Benz CLS Class, but you cannot really open the cover from the outside of your automobile. In this instance, here is the process to conduct this operation:
- Unplug the battery from your Mercedes Benz CLS Class
- Locate the spot of your light bulbs from the outside.
- From the inside of the trunk, you have to remove the lining of the trunk, kept by clips, you will have to lever softly on all the frame of the trunk to remove it.
- Once located, before removing the bulb holders, disconnect the holders for less complicated access.
- Using a screwdriver, lever the two plastic parts to remove the bulb holder
- Change the burnt-out license plate bulb on your Mercedes Benz CLS Class, test it and reassemble it, watching the clips on the trunk liner
.
.
There you have it, you have learned the main tactics for changing license plate bulbs on your car, be aware that on some models the method may be a bit different but you should be able to do it following the explanation of this article content. If you can’t do it, don’t be reluctant to go to your garage area it would be a shame to break a part of your Mercedes Benz CLS Class. If you want to change other bulbs like the position light bulbs on your Mercedes Benz CLS Class or the low beam bulbs on Mercedes Benz CLS Class, don’t be reluctant to browse our articles which explain you the operation to follow.
If you have any further questions about the Mercedes Benz CLS Class, do not hesitate to consult our Mercedes Benz CLS Class category.
