It doesn’t matter if you feel you can’t see properly at night, regardless you feel you’re lighting too low or too high, in all of these situations, there’s only one component of your automobile to blame – your low beams. Even though this correction may appear easy to do thanks to the thumbwheel on your dashboard, a whole correction is much more technical than this basic modification, and in this content page, we will discover how to adjust the low beam lights of your Lexus NX? For this, first of all we will discover why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Lexus NX.
Why set the low beam lights of your Lexus NX?
So let’s begin our content page with the advantage of adjusting the low beam lights of your Lexus NX. For a lot of people these lights are good enough adjusted, and it looks like that they light up enough at night. Unfortunately this is not necessarily the case and checking this setting, either because the low beams of your Lexus NX are not lighting up well, or because you have the feeling that they are too weak or too powerful is a good option .
Adjusting the low beam of your Lexus NX for security is a good option.
First of all, the adjusting of the dipped headlights of an Lexus NX must be done for a simple security reason. Regardless it’s for you, or for the other users you encounter during your night journeys. In fact, if you don’t see enough, the real danger is to fail to see an obstacle on the route, or to predict a curve badly. Alternatively, if your lights are too powerful, you risk dazzling the people in front of you, and thus putting yourself at risk. It is subsequently necessary for others as well as for you to have an optimal setting of your parking lights.
Setting the low beam headlights of an Lexus NX for law motives
In addition to security, there is a law that controls the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that illuminate at least 30 meters. Another legislation controls their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Lexus NX?
We will now go forward to the part that concerns you the most in this content page, how to adjust the low beams of his Lexus NX? This setting may seem a bit complicated, but if you follow the guidelines you should be able to do it without too much difficulty.
Preparations to set the low beam of a Lexus NX
First of all, you will need to prepare your automobile to adjust your low beam lights in good conditions, here are the preparations to apply:
- Place your automobile on a floor in front of a white wall for example, about 4 or 5 meters from the wall.
- Verify your tire pressure rigorously.
- Verify that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all needless weight from the automobile, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Lexus NX
Once your automobile is in place, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then move back your automobile up to a distance of between 7 and 10 metres. For the rest of the operation here are the basic steps to follow:
- Open your bonnet, situate the screws for horizontal and vertical adjustment of the lights of your Lexus NX (they are almost always marked, and those above must adjust the verticality and those on the side manages the horizontality of the adjustment).
- Use a cloth or some thing else to hide the light on which you are not making the modification.
- Using the screws to make the horizontal modification, you should have the most strong part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical manipulation, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once completed, verify that the low beam setting of your Lexus NX is consistent on the road, do not be reluctant to verify that it has been driven, in some cases it may move.
.
If you want to adjust the fog lights on your Lexus NX, please go through our content page on this subject.
If you wish more tutorials on the Lexus NX, go to our Lexus NX category.
