Recent cars all come with an incredible number of technology, nevertheless, due to your budget or the year of your Kia Rio, you may not be sufficiently fortunate to have them all. Today we’re going to help you correct this trouble by explaining how to install parking sensor on my Kia Rio? In fact, this feature is highly helpful, particularly if you live in the city and have to park your car often in narrow parking spots. To help you out, we’ll first look at how parking sensors work, then we’ll check out how to install a parking reverse sensor on a Kia Rio, and to conclude, how much does a parking sensor cost?
How does parking sensors function on an Kia Rio?
So we begin with the functioning of a parking sensor. As we revealed to you in the intro, this particularl interesting feature enables you to know the distance between the back of your Kia Rio and an obstacle when you move back. It is therefore extremely logical for drivers who have to maneuver on a regular basis, whose visibility is bad, or whose vehicle size is large.
Often installed as standard, the reverse sensors of a Kia Rio is made up of a kit of sensors (minimum 4) that will be activated with reverse gear and will locate obstacles in the vicinity. The technology utilized is ultrasounds, which will send a signal that will bounce off the obstacle and be returned to the sensor. A computer will examine the duration of this journey and calculate the distance between the obstacle and the radar. Ordinarily you will have a sound signal in the cabin which will enhance in strength with the proximity of the obstacle and in some models a visual marker in complement. The reversing radars of a Kia Rio will enable you for parking, but also for safety and avoiding pedestrians.
How to install parking sensors on a Kia Rio?
We now go forward to the step that you are most certainly most excited about, fitting reverse parking sensors on a Kia Rio. This part is for you if you don’t have a standard reserve sensor set up and you still want to take advantage of this technology, or if you have to replace a damaged one. You are fortunate people, it is possible to buy aftermarket parking sensors to install yourself on your Kia Rio.
How to change a broken backup sensors on a Kia Rio
First we’ll see how to change a broken parking sensor on an Kia Rio. In cases where your Kia Rio has suffered a rear impact and one of the sensors of your reversing radar has been damaged, it will have to be swapped out to let the system to function correctly. Good thing for you this process is really simple, you can even carry it out yourself without any specified mechanical skill:
- Get a replacing radar of the manufacturer’s brand name.
- Unplug the old backup sensor from the back of the bumper.
- Take out the destroyed parking sensor from your Kia Rio, this stage is very intuitive, it is simply clipped on.
- Remount the new sensor and connect it.
- All you’ll have to do is test it to make sure it’s working correctly.
- You will just need to stick to the installation instructions, but we summarize here the main procedures.
- Take out the bumper if you don’t have access to the inside of it.
- Think about the ideal placement of the sensors to avoid blind spots, using the supplied drill bell, drill your bumper.
- Place your various sensors.
- Route the cables to the headlamp unit that includes your reverse light.
- Get the current from the wires to connect your parking sensors to this one.
- Try it out all out.
- Follow the installation instructions which is accessible with some electrical knowledges.
- Locate the ideal sensor location, either behind the bumper for the electromagnetic reversing sensor(adhesive tape) and or the different places of the ultrasonic sensors.
- Glue them together and connect them using the box provided.
- Give it a try all out.
How to install an aftermarket parking sensor kit on an Kia Rio
Now we go forward to the part you’re likely most excited about, how to install a reverse sensor set up on a Kia Rio that doesn’t have one? As we explained earlier, you’re lucky because a good number of OEMs now offer aftermarket backup radar models. However, the best performing and least fragile models will be models that fit into your bumper. We will look at these models in this section. It is indispensable to have some notions in electricity, and some notions in do-it-yourself to contemplate the installation of the kit. You will certainly have to remove the bumper of your Kia Rio for the installation, do not be reluctant to browse our content page on this subject to learn the procedure to follow. If you don’t feel like it, you can call a mechanic, the process should take him between 1 and 2 hours, and for you around 3 hours.
Install a parking sensor without drilling on a Kia Rio
And to conclude, we will now present you the installation of a drill-free parking sensors system on a Kia Rio. There are two types, the ultrasounds more weak because subjected to the shocks, and the electromagnetics which stick in back of the bumper and which are thus protected, it does not damage your bumper and will thus be easy to take off. This type of radar sticks on the bumper. The installation of these types of sensors will be similar.
What’s the price of parking sensors for a Kia Rio?
Price of changing a broken reversing parking sensor for an Kia Rio
The replacement of a damaged reversing radar will depend on the model, but the price will vary between 10 and 30 euros per sensor. It is essential to count around one hundred euros for the installation of the kit by a mechanic.
Price of an ultrasonic parking sensors with drilling for Kia Rio
For the models with holes there are many kits and different brands but you will have to count about 50 euros for a high quality system.
Price of a parking sensors kit without drilling for a Kia Rio
.
Finally, for the price of a reversing radar without drilling for your Kia Rio, whatever type you go for, you will have to pay between 30 and 60 euros.
To get more tips on the Kia Rio, take a look at the Kia Rio category.
