Regardless you feel you can’t see good enough during the night, regardless you feel you’re lighting too low or too high, in all of these situations, there’s only one part of your motor vehicle to blame – your low beams. Despite the fact this correction may look easy thanks to the thumbwheel on your dashboard, a full correction is much more complex than this simple realignment, and in this document, we will find out how to adjust the low beam lights of your Chevrolet Colorado? For this, first we will find out why you should adjust your lights, and, secondly, how to adjust the low beam lights of your Chevrolet Colorado.
Why adjust the low beam lights of your Chevrolet Colorado?
So let’s begin our document with the interest of adjusting the low beam lights of your Chevrolet Colorado. For most people these lights are sufficiently adjusted, and it seems that they light up enough at night. Unfortunately this is not necessarily the case and checking out this setting, either because the low beams of your Chevrolet Colorado are not illuminating well, or because you have the sense that they are too weak or too powerful is a wise decision .
Adjusting the low beam of your Chevrolet Colorado for security is a wise decision.
To start, the adjusting of the dipped headlights of an Chevrolet Colorado must be done for a elementary security cause. Whether it’s for you, or for the other users you encounter during your night journeys. In reality, if you don’t see enough, the real danger is to miss an obstacle on the road, or to anticipate a curve badly. On the flip side, if your lights are too powerful, you risk dazzling the drivers in front of you, and thus putting yourself at risk. It is as a consequence important for others as well as for you to have an ideal setting of your parking lights.
Setting the low beam headlights of an Chevrolet Colorado for legal justifications
In addition to security, there is a law that regulates the power, the adjustment of low beams of cars, here is what it specifies: have between 2 and 4 headlights that light up at least 30 meters. Another law regulates their use, the European one (directive 76/756/EEC), which stipulates that the height of the beam must be between 500 mm and 1200 mm from the floor, and that they must be at least 600 mm apart.
How to adjust the low-beam headlamps of a Chevrolet Colorado?
We will now move on to the part that concerns you the most in this document, how to adjust the low beams of his Chevrolet Colorado? This setting may seem to be a bit complex, but if you follow the instructions you should be able to do it without too much difficulty.
Preparations to set the low beam of a Chevrolet Colorado
First of all, you will need to prepare your motor vehicle to adjust your low beam lights in good conditions, here are the preparations to apply:
- Place your motor vehicle on a floor in front of a white wall for example, about 4 or 5 meters from the wall.
- Check your tire pressure precisely.
- Check that the height adjustment knob for the lights is set to 0
- Try doing that with half a full tank.
- Remove all unneeded weight from the motor vehicle, only one person should be in the driver’s seat.
.
The setting of the low beam headlights of his Chevrolet Colorado
Once your motor vehicle is in position, you will turn on your dipped beam and make a cross-shaped mark (one horizontal and one vertical section) in the middle of the beam that will be projected on the wall. Make sure with a level that both parts of the cross are straight. Then move back your motor vehicle up to a distance of between 7 and 10 metres. For the rest of the task here are the simple steps to follow:
- Open your bonnet, identify the screws for horizontal and vertical adjustment of the lights of your Chevrolet Colorado (they are in general marked, and those above must adjust the verticality and those on the side manages the horizontality of the adjustment).
- Use a cloth or something else to hide the light on which you are not making the adjustment.
- Using the screws to make the horizontal adjustment, you should have the most strong part of the beam which should be a little to the right of the vertical line marked on the wall
- With regard to vertical manipulation, you will have to use the screw to try to position the upper end of the beam at the level of the horizontal marking on the wall, or slightly below.
- Once carried out, examine that the low beam setting of your Chevrolet Colorado is consistent on the road, do not be reluctant to examine that it has been driven, in some cases it may move.
.
If you want to adjust the fog lights on your Chevrolet Colorado, please go through our document on this subject.
To get more tips on the Chevrolet Colorado, take a look at the Chevrolet Colorado category.
