We will try again today to help you to solve the small problems related to your motor vehicle. We have recently discovered how to unblock a fuel door, or a tank cap, today we will concentrate on an irritating issue that can be dangerous in bad weather conditions, being a victim of wiper stuck on Chrysler Sebring . And to remedy this, we will first try to discover why the wipers on your Chrysler Sebring remain stuck and, secondly, how to unblock them.

wiper-stuck-chrysler-sebring

Why does the wiper of my Chrysler Sebring stay stuck?

So we will begin our article with the reasons of the stuck wipers of your Chrysler Sebring . To begin with we will concentrate on the front wipers and in a second time on the rear wiper.

Why are the front wipers on my Chrysler Sebring stuck in up or down position?

We will move through one by one the different problems that can cause the front wipers of your Chrysler Sebring to get stuck :

  • One of the most common causes of front wipers getting stuck on your Chrysler Sebring is related to the engine that drives them, in fact, these engines can, with time, lose power, and eventually need to be changed. You should notice before the total blockage of your windshield wipers that they work much slower.
  • Less common, but it can still happen, is that your front wiper blades are blocked as a result of an object that prevents the blades from functioning, have a look up to the axis of the blades.
  • If it is a lack of lubrication, you will locate that your front wipers are going slower, verify quickly the cause of the trouble or else the engines will be forced and damaged.
  • It is possible that the front wipers of your Chrysler Sebring may not operate as a result of a faulty comodo. To evaluate this, you need to disconnect the output wires and connect them together, if the wipers are functioning, the comodo is to blame for the problem.
  • Finally, last opportunity, the front wipers of your Chrysler Sebring are blocked as a result of a power failure, so you will have to verify two parts, the relay and the fuse.

Why is the rear window wiper on my Chrysler Sebring stuck?

Concerning the stuck rear window wiper of your Chrysler Sebring , the origins of your problems are more or less the same. Nevertheless there is only one wiper blade at the rear of your motor vehicle, there are still some dedicated parts that can cause problems only on the rear windshield of your Chrysler Sebring. So, make sure you carry out the same investigations as discovered in the previous component of this article.

What can I do to unlock the wiper on my Chrysler Sebring?

At last, for this second section, we will see what solutions are available to you to make sure that the wipers on your Chrysler Sebring are unlocked and that they operate effectively again.

How to unlock the wipers of my Chrysler Sebring?

If it is for the front windshield wipers or the rear windshield wiper, the solutions will be the same and we will outline them one after the other in this component, it is up to you to adapt them to the component that concerns you. If you have other blocking problems such as a fuel door stuck on Chrysler Sebring, do not think twice to seek advice from our article on this issue.

  • In this case, you will have to identify the engine, then disconnect the power cables of this one (be careful there must be some of them related to the different speeds of sweeping), then take out the brushes and the linkage. At last, you will have to unscrew these anchoring points which are generally fixed on silentblocks and reassemble a new wiper motor on your Chrysler Sebring

    • .

  • In this situation, it will be quite basic but expensive to change your commodo, the component generally costs around 200€, once tested you will be able to disassemble your commodo by removing the cover from the back of the steering wheel then disconnecting it and removing it with the fixing screws, you will just have to reassemble the new one.
  • Chrysler Sebring wiper blocked caused by a power failure: In this last situation, you will have to identify the origin of the failure (fuse or relay) and replace the faulty component

.

In the event that you have any additional questions about the Chrysler Sebring, do not hesitate to consult our Chrysler Sebring category.