More and more drivers are trying to take care of their cars by themselves. This outcomes in substantial cost savings because modern cars require more and more routine service and are done up of more and more technical parts that lead to new breakdowns or inconveniences. One of the problems that impacts more and more Chrysler Sebring owners is a clogged air flow meter, which will lead to a loss of power and black exhaust gases. In this article we are going to look at how to clean the mass air flow sensor of your Chrysler Sebring? . First, we will explain how your mass airflow sensor operates and its value, second, why it might be relevant to clean this sensor , and at last, how to clean the mass air flow sensor of a Chrysler Sebring .

clean-mass-airflow-sensor-chrysler-sebring

Utility and action of the mass air flow meter of a Chrysler Sebring

.
So we start our content page with the procedure and purpose of your Chrysler Sebring flowmeter.

The aim of the mass air flow sensor on Chrysler Sebring

The mass air flow sensor is a component that has been developed quite lately and principally supplied on diesel models. In fact, with injection engines, the fuel and air intake has become very precise and it is so essential for the ECU to know the exact volume of air added into the engine to modify the actions of complementary intake parts such as the injection or the EGR valve, if you have problems with the EGR valve on your Chrysler Sebring, do not think twice to seek advice from our content page on this subject.

Mass air flow sensor operation on Chrysler Sebring

Now, we are going to have a look at how it operates, before trying to clean the mass air flow sensor of your Chrysler Sebring , you must already figure out how it functions to do this routine service action accurately.

The mass air flow sensor is therefore principally there to collect data on the air intake of your motor vehicle. To achieve this, it must be installed just after the air intake of your Chrysler Sebring, i. e. just after the air filter. It is a pipe supplied with a sensor that will analyze the air in the intake and transfer the data to the ECU of your car.

Why clean the mass air flow sensor of a Chrysler Sebring?

The mass air flow sensor of your Chrysler Sebring can have problems and this is what we will try to find out and understand what problems you might be facing!

Mass air flow sensor problems Chrysler Sebring

Here are the different problems that the air flow sensor of your Chrysler Sebring can trigger:

  • higher fuel consumption: Because a dirty flow meter will actually result in excessive fuel consumption due to poor air flow…
  • Power loss: Related to the same problem, this lack of air can trigger a loss of power to your engine.
  • Difficulties starting the vehicle: Finally, one of the last traditional problems connected with a dirty flowmeter will be that your Chrysler Sebring will have more troubles to start the car.

How do I clean the mass air flow sensor from a Chrysler Sebring?

After examining the operation and problems that the flowmeter can trigger, we will look at how to resolve these problems by explaining to you how to clean the mass air flow sensor of your Chrysler Sebring . You should know that this procedure is quite simple to carry out and you will not need advanced mechanical expertise to do it your self, a good technique to avoid a trip to the mechanic and a steep bill. See below the different steps to follow to carry out this routine service act:

  • After having located the mass air flow sensor of your Chrysler Sebring , you will have to dismantle it. To achieve this, action gently, but you will just have to disassemble it on both sides of the air duct and detach the electrical plug on top of it.
  • Once taken apart, you will be able to proceed to the step cleaning the mass air flow sensor of your Chrysler Sebring . This sensor will, as time passes, get dirty and its two “filaments” that will give information to your computer on the quality and temperature of the air will no longer be able to collect data accurately, it is in this sense that it will affect the operation of the engine of your Chrysler Sebring. The aim of this cleaning will be to remove all its harmful particles to enable it to work efficiently again.
  • Let soak the lower part of your mass air flow sensor (not the plug part) in acetone or another solvent for a few minutes , which will remove most of the grime
  • .

  • Now we’ll move on to the very delicate cleaning of the flow meter filaments. You have to be very cautious, in any other case your mass air flow sensor will be permanently broken. With the help of a fine brush and solvent, gently clean the two filaments of your mass air flow sensor . If you are too afraid of harming it, you can also clean them with a brake fluid in the form of an aerosol by spraying the jet on these filaments.

Now you know how to clean the mass air flow sensor of your Chrysler Sebring , you should feel a noticeable difference in the behavior of your engine.

To find more tips on the Chrysler Sebring, take a look at the Chrysler Sebring category.